I Playing A Disc; Playing A Dvd Video Or An Audio Cd; Using The Dvd Menus - Hitachi DVPF2E Instruction Manual

PLAYING A DVD VIDEO OR AN
AUDIO CD
Getting started
Turn on the power of the TV, amplifier and any other
components which are connected to the DVD/VCR.
(Change the input system to suit the DVD/VCR, and
check that the sound volume is correct.)
1
Press the (Standby/Power ON) Button.
¡ The power will turn on.
Check that the DVD OUTPUT Light is lit. If not
press the DVD Button on the remote control to
switch to DVD mode.
2
Press the OPEN/CLOSE
¡ The disc loading tray will open.
3
Place a disc into the tray.
¡
Make sure the disc is sitting properly in the correct
recess, with the label side up.
4
Press the Button.
B
¡
The tray will close automatically, and playback will
then start from the first chapter or the first track of
the disc. With some discs, if the tray has been closed
by pressing the OPEN/CLOSE
need to press the Button to start the disc.
B
¡
When you playback the DVD which a title menu is
recorded, it may appear on the screen. In this case,
refer to "USING THE DVD MENUS" or "USING
THE TITLE MENU".
5
Press the C Button to stop play.
PLAYING A DISC
Notes
¡
¡
DVD CD
¡
¡
¡
(A)
Button.
¡
Some DVDs contain their own menus, such as a guid-
ance menu which describes the contents of the disc or
a selection menu for sound, language and other cus-
tomised settings.
¡
Button, You
(A)
¡
– 33 –
While the setup menu is shown you can not open or
close the tray.
A "prohibited icon" may appear
at the top-right on the TV screen
during operation, warning that a
prohibited operation has been
encountered by the DVD/VCR or
the disc.
If a disc is dirty or has scratches, the pictures may
appear distorted and the playback operation may
stop. In such cases, clean the disc and unplug the
power cord and then plug it again before resuming
playback.
With DVDs that use some titles for playback
programme signals, playback may start from the
second title, or it may skip these titles.
During the playback of two layered disc, pictures
may stop for a moment. This happens when the 1st
layer switches to the 2nd layer. This is not a mal-
function.
When DVD sits idle for more than thirty-five min-
utes, it will be turned off automatically.

USING THE DVD MENUS

1
Press the MENU Button.
The DVD menu will appear.
2
Select the desired title.
Press the Arrow Buttons (
setting, and then press the ENTER Button.
3
Playback will start from the selected title.
DVD
L / K /B/s) to change the
EN
2C15