Chrysler 300 Owner's Manual page 313

Selector Lever
Gear Ranges
"P" (Park)
"P" (Park) supplements the parking brake by locking the
transmission. The engine can be started in this range.
Never use "P" (Park) while the vehicle is in motion.
Apply the parking brake when leaving the vehicle in this
range.
When parking on a flat surface, place the gear selector in
the "P" (Park) position first, and then apply the parking
brake.
When parking on a hill, it is important to set the parking
brake before placing the gear selector in "P" (Park),
otherwise the load on the transmission locking mecha-
nism may make it difficult to move the selector out of
park. As an added precaution, turn the front wheels
toward the curb on a downhill grade and away from the
curb on an uphill grade.
STARTING AND OPERATING 313
5