Euro-Pro XDB520H User Manual

Canister Vacuum
Item # XDB520H
for Models CV520HR/HB/HY
25 Paper Bags
Warning:
To reduce the risk of electric shock, the power cord
must be disconnected before changing the bag or
performing maintenance/trouble shooting checks.
Changing the Dust Bag:
1. Unplug power cord from wall outlet.
2. Open the dust bag compartment, lift up the cover locking tab. (Fig. 1)
3. Pull dust bag retaining clip forward. Remove the dust bag from the dust
bag compartment by pulling up the cardboard section. Dispose of paper
bags. Never reuse paper bags.
4. Insert a new dust bag back into the dust bag support guide inside the
bottom of the dust bag compartment making sure that the dust bag rubber
seal is aligned correctly against the air intake hole on the unit. (Fig. 1)
When inserting the new dust bag, make sure that the arrow on the bag is
pointing down. (Fig. 2)
5. Release the dust bag retaining clip, ensuring that the dust bag is held in
place.
Retaining
Clip
Lift Up
Caution: Make sure that the cardboard section of the dust bag is firmly in
place inside the dust bag support.
Caution: The dust bag compartment will not close if the dust bag is not
inserted properly into the unit. Never use the vacuum without a
dust bag inserted into the unit. NEVER reuse the paper dust bags.
NEVER REUSE PAPER BAGS
EURO-PRO Operating LLC
94 Main Mill Street, Door 16
Plattsburgh, NY 12901
Tel.: 1 (800) 798-7398
Fig. 1
Fig. 2
Printed in China
Warning:
Changing the Dust Bag:
1. Unplug power cord from wall outlet.
2. Open the dust bag compartment, lift up the cover locking tab. (Fig. 1)
3. Pull dust bag retaining clip forward. Remove the dust bag from the dust
bag compartment by pulling up the cardboard section. Dispose of paper
bags. Never reuse paper bags.
4. Insert a new dust bag back into the dust bag support guide inside the
bottom of the dust bag compartment making sure that the dust bag rubber
seal is aligned correctly against the air intake hole on the unit. (Fig. 1)
When inserting the new dust bag, make sure that the arrow on the bag is
pointing down. (Fig. 2)
5. Release the dust bag retaining clip, ensuring that the dust bag is held in
place.
Retaining
Clip
Caution: Make sure that the cardboard section of the dust bag is firmly in
place inside the dust bag support.
Caution: The dust bag compartment will not close if the dust bag is not
inserted properly into the unit. Never use the vacuum without a
dust bag inserted into the unit. NEVER reuse the paper dust bags.
NEVER REUSE PAPER BAGS
EURO-PRO Operating LLC
Rev. 03/05A
94 Main Mill Street, Door 16
Plattsburgh, NY 12901
Tel.: 1 (800) 798-7398
Canister Vacuum
Item # XDB520H
for Models CV520HR/HB/HY
25 Paper Bags
To reduce the risk of electric shock, the power cord
must be disconnected before changing the bag or
performing maintenance/trouble shooting checks.
Fig. 1
Lift Up
Fig. 2
Rev. 03/05A
Printed in China