Keyboard - Packard Bell EasyNote B3 Disassembly Manual

Picture 4. WLAN Mini PCI Adapter and Antenna
Note: The WLAN card has 2 connectors: MAIN and AUX. Please be sure to connect the
antenna to the MAIN connector when re-assembling the WLAN card!

Keyboard

To remove the keyboard, perform the following steps:
1. Remove the 3 screws located in the battery compartment
2. Push up the keyboard cover in the area indicated with the 2 arrows in
3. Remove the 3 screws securing the keyboard shown in
4. Gently lift out the keyboard.
5. To disconnect the flat cable, loosen the clip and slide out the cable
Picture 5. Battery Compartment
Picture 6. Keyboard Cover Removed
(Picture 5).
Picture
Picture 6.
(Picture 7).
6
5.