Euro-Pro EP76 Changing Filters Manual

Bagless shark compact canister vacuum

Hide thumbs Also See for EURO-PRO EP76:

Enlarged version

1. Open the lid.

2. Remove the used micro-exhaust filter.

3. Insert a new micro-exhaust filter.

4. Close the lid.

IMPORTANT: This motor is equipped with a heat sensitive thermostat. If

for some reason the vacuum cleaner will overheat, it will

then stop working automatically. When the motor will cool

off, the unit will restart by itself.

Changing and Cleaning the Filter

• Filter should be cleaned at least twice a year or when it becomes visible solid.

• Always operate the cleaner with the filter installed.

• Disconnect from electrical outlet before cleaning the filter.

• Do not use a washing machine to rinse the filter.

• Do not use a hair dryer to dry it.

Bagless Shark

Compact Canister Vacuum

Model EP76

Changing the filters

EURO-PRO Operating LLC

U.S.: 94 Main Mill Street, Door 16

Plattsburgh, NY 12901

Tel. : 1 (800) 798-7398

www.sharkcompany.com

Canada: 4400 Bois-Franc

St-Laurent, QC H4S 1A7

Table of Contents

Do you have a question about the EURO-PRO EP76 and is the answer not in the manual?

Page 1: Changing The Filters
4. Close the lid. Motor Thermostat IMPORTANT: This motor is equipped with a heat sensitive thermostat. If for some reason the vacuum cleaner will overheat, it will then stop working automatically. When the motor will cool off, the unit will restart by itself.
Page 2 1. Insert the power plug into the wall outlet. 2. Press the Power On/Off Switch to activate the vacuum cleaner. 3. To rewind the power cord, press the cable rewind button with one hand and guide the power cord with the other hand to ensure that it does not whip causing damage.