Motor Thermostat - Euro-Pro BAGLESS SHARK EP78 Use And Care Instructions Manual

Changing and Cleaning the Filter
• Filter should be cleaned at least twice a year or when it becomes visible solid.
• Always operate the cleaner with the filter installed.
• Disconnect from electrical outlet before cleaning the filter.
• Do not use a washing machine to rinse the filter.
• Do not use a hair dryer to dry it.
1. Push the dust cup lock to
open the dust cup.
2. Remove the filter from the
grill-filter.
3. Rinse filter in lukewarm
water and dry the
filter completely.
4. Put the filter into the grill-filter.
5. A severely solid or clogged filter
should be thoroughly washed
with fresh tepid water. A mild
detergent can be used if
required.
8
Changing the Micro-Exhaust Filter
1. Open the lid.
2. Remove the used micro-exhaust filter.
3. Insert a new micro-exhaust filter.
4. Close the lid.

Motor Thermostat

IMPORTANT: This motor is equipped with a heat sensitive thermostat. If
for some reason the vacuum cleaner will overheat, it will
then stop working automatically. When the motor will cool
off, the unit will restart by itself.
9