NEC NLT-26HD1 Owner's Manual page 19

- You can check the programmes stored in the memory by displaying the programme table.
5 5
Skipping a programme number
Select a programme number to be
F G
skipped with the D E or / button.
/
Press the BLUE button.
The skipped programme turns to blue.
Press the BLUE button again to release
the skipped programme.
When a programme number is skipped it
means that you will be unable to select it
using the D E button during normal TV
/
viewing. If you want to select the skipped
programme, directly enter the programme
number with the NUMBER buttons or
select it in the programme edit or table
menu.
Repeatedly press the MENU button to
return to normal TV viewing.
1 1
Displaying programme table
Press the LIST button to display the
The programme table appears on the screen.
One programme table contains ten programmes as below.
You may find some blue programmes. They have been set up to be
skipped by auto programming or in the programme edit mode.
Some programmes with the channel number shown in the programme
table indicate there is no station name assigned.
2
2
Selecting a programme in the programme table
Select a programme with the D E
/
Then press the OK button.
The set switches to the chosen programme number.
3 3
Paging through a programme table
There are 10 programme table pages which contain 100 programmes.
F G
Pressing the D E or / button repeatedly turns the pages.
/
Repeatedly press the MENU button to return to normal TV viewing.
menu.
Programme table
F G
or / button.
EN
19