Table of Contents
Advertisement
* If this indicator goes dim or no longer lights
while an effect is ON, or when the functions are
indicated, the battery is near exhaustion and
should be replaced immediately. For instructions
on changing the batteries, refer to "Changing
the Battery" (p. 22).
* The CHECK indicator shows whether the effect
is on or off, and indicates the different functions.
It does not indicate whether the power to the
device is on or not.
3. OUTPUT-A (MONO) Jack
OUTPUT-B Jack
The output jacks are used to connect the unit
to an amplifier or another effects unit.
* The unit's functions differ according to how it is
connected. Refer to "Setting the Output
Method" (p. 16).
4. INPUT-A (MONO) Jack
INPUT-B Jack
These jacks accept input signals (coming
from a guitar, some other musical instru-
ment, or another effects unit).
* The unit's functions differ according to how it is
connected. Refer to "Setting the Output
Method" (p. 16).
* The INPUT-A (MONO) and INPUT-B jacks
double as power switches. Power to the unit is
turned on when you plug into the INPUT-A
(MONO) or INPUT-B jack; the power is turned
off when the cable is unplugged. Be sure to
disconnect any cord plugged into the INPUT-A
(MONO) or INPUT-B jack when not using this
effects device.
5. TEMPO/EXP Jack
This jack is for connecting an optional external
footswitch (FS-5U) or an optional expression
pedal (Roland EV-5).
Panel Description
5
Hide quick links:
Advertisement
Table of Contents
