Using The Tempo Delay; Setting The Tempo Using The Built-In Pedal - Boss DD-7 Digital Delay Owner's Manual

Using the Tempo Delay

Tempo input allows you to set the delay time to
match the tempo of a song by repeatedly pressing
the pedal switch in time with the desired tempo.
You can also use this method to change the delay
time to any setting you like as you perform.
Using tempo input, the delay time can be set
within the range of 0.2–3.2 seconds.
* With long delay, the maximum setting is 6.4 seconds.
Setting the Tempo Using the
Built-in Pedal
1. Select the mode
Use the MODE knob to select the mode to
be used.
* Tempo input cannot be used in HOLD mode.
2. Switch to TEMPO mode
Hold down the pedal switch for at least
two seconds
(the CHECK indicator lights
.
green)
12
* When an optional external footswitch (the FS-
5U) is connected to the TEMPO/EXP jack, you
won't be able to enter TEMPO mode by
pressing the built-in pedal.
3. Begin inputting the tempo
Press the pedal switch in time with the
song tempo
(the CHECK indicator flashes red
.
and green)
* The timing with which you press the pedal is
converted to quarter-note beats.
4. Finish inputting the tempo
Hold down the pedal switch for at least
two seconds to complete the setting
CHECK indicator lights red)
* The tempo may become confused momentarily
when you go from Step 3 to Step 4.
* Turning the D.TIME knob resets the delay time
to that indicated by the knob's position.
(the
.