Before Each Use - Craftsman 917.276751 Operator's Manual

AS YOU COMPLETE ._'_'t _'_'t _9"_ "
REGULAR SERVICE /_r_qy_"TSERVlCE DATES
C ;)):;kk TBirrakp rOsPe:;;i° n _
Check Operator Presence and
T
ROE Systems
R
Check for Loose Fasteners if II_s if
A Sharpen/Replace Mower Blades 1_3
C Lubrication Chart if I_
0 Check Battery Level _4
R
Clean Battery and Terminals _ if
Check Transaxle Cooling
v'
Check V-Belts I_
Check Engine Oil Level if
Change Engine Oil (with oil filter) 1_1,2
E
Change Engine Oil (without oil filter)
_1,2
N Clean Air
Filter
_IIP2
G Clean Air Screen _2
Inspect Muffler/Spark Arrester if
E Replace Oil Filter (If equipped)
_1,2
Clean Engine Cooling Fins I_ 2
Replace Spark Plug I1_ if
Replace Air Filter Paper Cartridge 1_2
Replace Fuel Filter
1 - Change more often when operating under a heavy load or
in high ambient temperatures,
2 - Service more often when operating in dirty or dusty conditions,
3 - Replace blades more often when mowing in sandy soil.
4 - Not required if equipped with maintenance-free battery.
5 - Tighten front axle pivot bolt to 35 ft,-Ibs, maximum,
Do not overtighten.
GENERAL RECOMMENDATIONS
The warranty on this tractor does not
cover items that have been subjected to @ S_
operator abuse or negligence. To receive Zerk
full value from the warranty, operator
must maintain tractor as instructed in this
manual.
Some adjustments will need to be made
periodically to properly maintain your
tractor.
At least once a season, check to see if
you should make any of the adjustments @Engine
described in the Service and Adjustments "
section of this manual. "
• At least once a year you should replace
the spark plug, clean or replace air filter,
and check blades and belts for wear.
A new spark plug and clean air filter
assure proper air-fuel mixture and help
your engine run better and last longer.
BEFORE EACH USE
1. Check engine oil level.
2. Check brake operation.
3. Check tire pressure.
4. Check operator presence and
ROE systems for proper operation.
5. Check for loose fasteners.
LUBRICATION CHART
-- @ Spindle
Zerk
@Front Wheel ,-
Bearing
Zerk
@Front Wheel
Bearing Zerk
_SAE 30 or 10w30 Motor Oil
@General Purpose Grease
_PRefer to Maintenance "ENGINE" Section
IMPORTANT: Do not oil or grease the
pivot points which have special nylon
bearings. Viscous lubricants will attract
dust and dirt that will shorten the life of
the self-lubricating bearings. If you feel
they must be lubricated, use only a dry,
powdered graphite type lubricant sparingly.
17