The liability of EURO-PRO Operating LLC is limited solely to the cost of the repair or replacement of the unit at our option. This warranty does not cover normal wear of parts and does not apply to any unit that has been tampered with or used for commercial purposes.
TROUBLE SHOOTING PROBLEM POSSIBLE REASON PRESSURE Electrical socket is faulty or WASHER WILL breaker has tripped. NOT START WHEN Voltage is inadequate. THE ON/OFF GFCI has tripped. SWITCH IS IN THE Power cord is not plugged in. "ON" POSITION PUMP DOESN'T Water intake filter is clogged.
Page 4
• ALWAYS turn water supply "ON" before turning the pressure washer "ON". Running pump dry causes serious damage. • Do not operate the pressure washer with Failure to follow these instructions can result the inlet water screen removed. Keep in serious injury, including death.
When using your pressure washer, always have it in the horizontal position as shown below. NEVER have it in the upright position. Fig. 7 Fig. 8 GETTING TO KNOW YOUR PRESSURE WASHER Hose Connector Water Intake Fig. 9 Fig. 10 CAUTION...
Page 6
Suitable Use of Your Pressure Correct Use of the Pressure Washer Washer • Place the pressure washer in a safe This high pressure washer is suitable for area and on a horizontal surface. non-professional use. The working • When using the pressure washer, temperature must range between 40°F...
Need help?
Do you have a question about the VPW38HB and is the answer not in the manual?
Questions and answers