Related Manuals for Euro-Pro VPW43
Summary of Contents for Euro-Pro VPW43
- Page 1 OWNER'S MANUAL Model VPW43 120V., 60 Hz., 12.5 Amps. For information or assistance: EURO-PRO Operating LLC 94 Main Mill Street, Door 16 Plattsburgh, NY 12901 Tel.: 1-800-798-7398...
- Page 2 Any repair or replacement of the power cord must be performed by a The liability of EURO-PRO Operating LLC is limited solely to the cost of the repair or replacement of qualified (licensed or certified) electrical the unit at our option. This warranty does not cover normal wear of parts and does not apply to any technician.
- Page 3 "ON". Running pump dry causes serious damage. • Do not operate the pressure washer with the inlet water screen removed. Keep screen clear of debris and sediment. • NEVER operate pressure washer with broken or missing parts. Check equipment regularly and repair or replace worn or damaged parts immediately.
- Page 4 GETTING TO KNOW YOUR PRESSURE WASHER 1. Pressure Washer 12. High Pressure Hose Connector 2. Water Intake 13. High Pressure Lance 3. High Pressure Output 14. Fan Jet Lance 4. On/Off Switch 15. Detergent Applicator Bottle 5. Trolley 16. Garden Hose Coupling 17.
- Page 5 Winterizing & Long Term Storage water intake connector. (Fig. 14). 1. Disconnect all water connections. Remove periodically and inspect for 2. Turn the pressure washer on for a any deposits that might accumulate few seconds, until any remaining there. water in the pump exits.
- Page 6 Secure the top brace to the pressure washer unit 2. Once the high pressure hose is with two (2) of the 1-inch #8 Phillips connected to the main unit, you can screws provided.
Need help?
Do you have a question about the VPW43 and is the answer not in the manual?
Questions and answers
Can I get a replacement wheel?