* WARNING The liability of EURO-PRO Operating LLC is limited solely to the cost of the repair or replacement of the unit at our option. This warranty does not cover normal wear of parts and does not apply to any unit that has been tampered with or used for commercial purposes.
• ALWAYS turn water supply "ON" before turning the pressure washer "ON". Running pump dry causes serious damage. • Do not operate the pressure washer with the inlet water screen removed. Keep screen clear of debris and sediment. • NEVER operate pressure washer with broken or missing parts.
32°F. OPERATING INSTRUCTIONS Winterizing & Long Term Storage 1. Disconnect all water connections. 2. Turn the pressure washer on for a few seconds, until any remaining water in the pump exits. 3. Turn the unit off immediately. 4. Store the pressure washer, parts and accessories in an area with a temperature above 32°F.
Page 5
If you have any questions, call Euro-Pro Operating LLC customer service at 1 (800) 798-7398. Keep all small and potentially harmful parts of the packaging (plastic bags, foamed polystyrene, nails, etc.) out of the reach...
Page 6
2. Insert the wheels onto the wheel axle and push in the wheel lock to lock the wheels in place. (Fig. 2) 3. Turn the pressure washer upside down and slide the front support onto the unit. (Fig 2) 4. Using the 1” long nickel plated screw, secure the front support to the unit.
Need help?
Do you have a question about the VPW49HA and is the answer not in the manual?
Questions and answers
I need to order a new trigger gun, where to order it from, please advise.