Monitoring An Automatic Timer Recording; Clearing A Program Timer - Optimus 110 Owner's Manual

16-547.fm Page 31 Tuesday, July 20, 1999 4:45 PM
Monitoring an Automatic Timer
Recording
1. Turn on the TV and set it to the same chan-
nel as the VCR's
3 CH. 4
Note: If you are using a TV/monitor that is
connected to the VCR's
jacks, set the TV/monitor to the video
mode.
2. Press until the VCR displays VCR.
TV/VCR
Checking/Changing Program Timers
1. Turn on the TV and set it to the same chan-
nel as the VCR's
3 CH. 4
Note: If you are using a TV/monitor that is
connected to the VCR's
jacks, set the TV/monitor to the video
mode.
2. Turn on the VCR and press
the VCR displays VCR.
3. Press . The TV displays the first four
PROG
programs.
P DT STRAT
1 DAY 9 : 00 A 12 : 00 A 08
2 8 1 0 : 00 P 12 : 00 P 125 SLP
3 10 8 : 00 P 9 : 00 P 10
4 SU 9 : 00 P 10 : 00 P
SELECT 1-8 : PUSH
ENTER : PUSH SET
CANCEL : PUSH CLEAR KEY
END : PUSH PROG
4. Select the program you want to change
using s/t, then press
SEL
5. Follow Steps 8–12 under "Setting the Pro-
gram Timer" on Page 29 to correct the
entry you want.
6. After checking or correcting a program,
press again, then turn off the VCR.
PROG
switch.
AUDIO/VIDEO OUT
switch.
AUDIO/VIDEO OUT
until
TV/VCR
STOP CH SPD
SP
SP
L SLP
/ KEY
KEY
KEY
.
SET

Clearing a Program Timer

If the timer recording has not yet started:
1. Follow Steps 1–3 under "Checking/Chang-
ing Program Timers."
2. Highlight the program you want to clear,
then press .
CLEAR
3. Press to return to the normal screen.
PROG
Turn off the VCR if you still have at least one
timer program entered.
If a timer recording is in progress:
1. Press to stop timer recording. The
POWER
TV displays
TO CANCEL TIMER REC
PUSH POWER THEN STOP KEY
watching the signal from the VCR.
2. Within 10 seconds, press
disappears from the VCR's display.
if are
. TIMER
STOP
31