Advertisement
Available languages
Available languages
Become familiar with these terms
before operating the unit.
CFM:
Cubic feet per minute.
SCFM: Standard cubic feet per min-
ute; a unit of measure of air delivery.
PSI: Pounds per square inch gauge;
a unit of measure pressure.
Code Certification:
Products that
bear one or more of the following
marks: UL_>*, C UL, ETL_*>*, CETL, have
been evaluated by OSHA certified
independent safety laboratories and
meet the applicable Standards for
Safety.
*UL_ is a registered trademark of
Underwriters
Laboratories
and ETL®
is a registered trademark of Electrical
Testing Laboratories.
Cut-In Pressure:
While the motor
is off, air tank pressure drops as you
continue to use your accessory. When
the tank pressure drops to a certain
low level the motor will restart auto-
matically. The low pressure at which
the motor automatically restarts is
called "cut-in" pressure.
Cut-Out
Pressure:
When an air com-
pressor is turned on and begins to
run, air pressure in the air tank begins
to build. It builds to a certain high
pressure before the motor automati-
cally shuts off, protecting your air tank
from pressure higher than its capacity.
The high pressure at which the motor
shuts off is called "cut-out"
pressure.
Branch Circuit: Circuit carrying elec-
tricity from electrical panel to outlet.
Includes: brad nailer, nails, 25' recoil
1/4" male quick-connect
plugs, PTEE-
air hose, inflation needle, tapered blow
thead seal tape, I/4" female quick-
gun nozzle, blow gun adapter, blow
connect body, hex wrench(2) and oil.
gun safety nozzle, blow gun, tire chuck,
This air compressor
pump is capable
average duty cycle be maintained;
of running continuously. However, to
that is, the air compressor
pump
prolong the life of your air compressor,
should not run more than 30-45
it is recommended
that a 50%-75%
minutes in any given hour.
9 - ENG
Advertisement
