Table of Contents
Advertisement
Available languages
Available languages
GENERAL SAFETY RULES
WARNING: Read all safety warnings and instructions. Failureto follow the
warnings and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
READ AND SAVE THESE INSTRUCTIONS
A
JL
WARNING:
Do not modify this tool and/or used it for any application
other
than that for which it was designed.
•
Do not use for scaffolding
or as ladder.
Do not stand or climb on the
bench top tool stand; it could fall or tip over, causing
serious injury.
•
Do not overload.
The maximum
capacity
for the bench top tool stand
is 3001bs.
•
Do not apply an unbalanced
load. This could cause the bench top tool
stand to tip over.
•
Store the stand
properly.
Do not store the bench top tool stand outdoors
or in a damp location.
•
Keep the work area clean,
uncluttered,
and well lit. Do not work on or
place the bench top tool stand legs on floor surfaces that are slippery
from
sawdust,
oil, water or wax.
•
Keep children and bystanders
away while operating
a power
tool.
Distractions
may cause you to lose control.
Visitors should wear the same
safety equipment
as the operator.
•
When using a power
tool with the bench top tool stand,
always
follow
the safety
instructions
in the power tool's
Operator's
Manual.
•
Always
wear safety
glasses
or eye shields
when operating
power
tools.
•
Dress properly.
Do not wear loose clothing
or jewelry. Keep your hair,
clothing
and gloves away from moving parts. Loose clothes,
jewelry or long
hair can be caught in moving parts. Always wear non-slip
footwear.
Tie back
long hair. Roll long sleeves above the elbow.
•
Always
use clamps
or other practical
ways to support
the workpiece
and secure
it to a stable
platform.
Holding the work by hand or against
your body is unstable and may lead to loss of control.
Page 6
22305
ManuaLRevised_12
0528
Advertisement
Table of Contents
