Advertisement
ITEMS
INCLUDED:
•
Dust Chute Elbow
•
Dust Access Hose
TOOLS
NEEDED:
•
Flat Blade Screwdriver
Installation of your Vacuum Dust Hose Attachment is
quick and simple.
,_
WARNING:
Always unplug your sander before
installing any accessories.
Accidental starting
could result in serious injury.
•
Insert the Dust Chute Elbow into the Dust
Access Hose until the elbow snaps into place.
See Figure 2.
DUS_I__T
CHUTEELBOW
Fig. 2
•
Using a medium flat blade screwdriver,
remove the
dust cover by aligning the arrow on the Dust Cover
with the notched arrow on the base of the sander.
See Figure 3.
DUST
COVER
f
/
DUST
Fig. 3
•
Align flexible tabs on Dust Chute Elbow with tab
slots on sander. Push in flexible tab and push
elbow into sander until it turns into place. See
Figure 4.
DUST
CHUTEELBOW
DUST
ACCESSHOSE
Fig. 4
•
Clip top of Dust Access Hose to the bend relief of
the sander's electric cord. See Figure 5.
BENDRELIEF
Fig. 5
•
Install vacuum to end of Dust Access Hose. See
Figure 6.
VACUUM HOSE
DUST
ACCESSHOSE
Fig. 6
•
Save Dust Cover for possible future use without
vacuum dust pickup.
WARNING:
Do not let
with
familiarity
this
attachment make you careless. Remember that a
careless fraction of a second is sufficient to inflict
severe injury.
,_
WARNING:
any parts are missing,
not
If
do
operate this attachment until the missing parts
are replaced. Failure to do so could result in
possible serious personal injury.
8
Advertisement
