Problem Solver - GE Profile Advantium PSA1200 Owner's Manual

Troubleshooting
Advantium Oven
Questions?
Use this
problem
solver
Problem Possible Causes What To Do/Explanation
DISPLAY
The display is blank. The display has . Check the SETTINGS menu for clock
been turned off. display settings. Turn the display on.
"Control Panel The control has • Press and hold CLEAR/OFFfor about
LOCKED" appears been locked. 3 seconds to unlock the control.
in display. See Other Features Section.
Control display is Clock is not set. • Follow prompts to set the clock.
lighted yet oven
will not start. • Open the door and close securely.
• Follow prompts
Door not securely closed.
START/PAUSE pad
not pressed after entering
cooking selection.
Delay Start was • Press CLEAR/OFFand reset.
accidentally set.
Oven is in DEMO Mlode . Unplug the oven for 1 minute, plug
the oven back into the wall DO NOT set
the oven clock, press and hold the HELP
and START/PAUSE pads for 3 seconds.
The control should exit DEMO mode.
Set clock and continue.
CLEAR/OFFwas pressed . Reset cooking program and press
accidentally. START/PAUSE
OTHER PROBLEMS
The door and inside
of the oven feels hot.
The oven
produces intense heat
in a small space.
• This is normal.
• Use oven mitts to remove food when
when ready.
FIoor ofthe ovenis
warm, even when
the oven has not
been used.
The cooktop light is
located below the oven
floor. When the light
is on, the heat it produces
may make the oven floor
get warm.
• This is normal.
Oven will not start. A fuse in your home
may be blown or the
circuit breaker tripped.
• Replace fuse or reset circuit breaker.
Power surge. • Unplug the oven, then plug it back in.
Plug not fully inserted
into wall outlet.
. Miake sure the plug on the oven is
fully inserted into wall outlet.
Glass microwave
tray does not lock
into center hub.
. Align the protrusions on the bottom of
the glass microwave tray with the
indentation in the turntable. This fit is
not tight, some movement is normal.
38