Control Settings - GE WNRD2050 Owner's Manual

About the control settings.
Irl CLOTHESCARESELECTION
I cBg[_ST ÷ 1 the fabric manufacturer.
For knits, wrinkle-free and permanentpress items.
For lingerie and items labeleddelicate with light soils.Providesperiods of agitation and soak during
wash and rinse.
Spin and drain any cycleat any time.
Forheavily to lightlysoiledcottons,household l inens, w orkand playclothes.
Forheavily to lightlysoiledcottons,household l inens, w orkand playclothes.
Fornon-colorfast cottons andblends, a nd itemsthat are labeled coldwashb,
le
tOAD SIZE
A LOAO SIZE setting
is m*tomatic_dlv set when
the CLOTHESCARESELECTIONis chosen. The LOAO SIZE setting
can be changed by pressing the pad _br the size you _,_mlt.
I,oosely load clothes no higher than the top row ot holes in the washer basket. The water level should just cover
the clothes.
la
START/PAUSE
Press STARTto begin the cycle. Pressing STARTag;fin or raising the lid will PAUSEthe
cycle.
[] Press twice to select the last cycle used and start the washer.
[] ]if the washer is framing, press once to interrupt the cycle; press again to continue the cycle.
STOP
_NCEL
STOP/CANCEL
This pad should not be used to interlui_t
or pause
a c_cle.
Pressing this pad will cancel the current settings, and the ,settinos_, w ill be lost.
Estimated Time Remaining
• Displays the approximate time remaining tmtil the end of the cycle.
• ]if the estimated time remaining is more than 60 minutes, "1 H" will flash in the display, followed b)' the
additional renmilfing milmtes. When the tilne renmildng is less than 60 milmtes, the tilner will cotmt down.
•Cvcle time is afi'ected by how long it takes the washer to fill. This depends on the water i)ressure in your
home. The "slnart" tilner "learns" the alnount of tilne it takes to fill wmr washer and a@usts the total tilne
accordingly.
5