PROPER INSTALLATION This washer must be properly installed and located in accordance with the Installation Instructions before it is used. If you did not receive an Installation Instructions sheet, visit our Website at: GEAppliances.com. s Install or store where it will not be exposed to temperatures below freezing or exposed to the weather.
WHEN USING THE WASHER s Never reach into washer while it is moving. Wait until the machine has completely stopped before opening the lid. s Do not mix chlorine bleach with ammonia or Use this appliance acids such as vinegar and/or rust remover.
ONLY FILL Vision-Impaired Washer/Dryer Kit For washer model WNRD2050 and dryer model DNCD450, a kit is available for the vision-impaired containing Braille overlays that fit over the pads on the washer and dryer control panels. Included in the kit are:...
A LOAD SIZE setting is automatically set when the CLOTHES CARE SELECTION is chosen. The LOAD SIZE setting can be changed by pressing the pad for the size you want. Loosely load clothes no higher than the top row of holes in the washer basket. The water level should just cover the clothes.
The fabric softener dispenser automatically releases liquid fabric softener at the proper time during the cycle. Do not stop the washer during the first spin. This will cause the dispenser to empty too soon. To use, follow these steps: Make sure dispenser is securely attached to agitator.
Loading the Washer Load dry items loosely, no higher than the top row of holes in the washer basket. When loading wet items make sure you set the load/water level high enough to allow the items to move freely.
For more information, visit GEAppliances.com, or call 800.GE.CARES (800.432.2737). Do not store the washer where it will be exposed to the weather. Long Vacations: Be sure water supply is shut off at faucets.
• Make sure load size selected matches clothes load size. • Check fabric softener package for instructions and follow directions for using dispenser. • While this is not caused by the washer, you can slow the pilling process by washing garments inside out.
Page 10
What To Do • This is normal. The DELICATES cycle has a short soak period. • The washer may pause during the spin cycle to remove soapy water more efficiently. • Make sure cord is plugged securely into a working outlet.
Page 11
• Turn off the water source and remove the water connection hoses from the upper back of the washer. Use a brush or toothpick to clean the screens in the machine. Reconnect the hoses and turn the water back on.
Page 12
• Straighten hoses. • Turn off the water source and remove the water connection hoses from the upper back of the washer. Use a brush or toothpick to clean the screens in the machine. Reconnect the hoses and turn the water back on.
You can rest easy, knowing that all your valuable household products are protected against expensive repairs. Place your confidence in GE and call us in the U.S. toll-free at for more information. *All brands covered, up to 20 years old, in the continental U.S.
Year * Please provide your e-mail address to receive, via e-mail, discounts, special offers and other important communications from GE Appliances (GEA). Check here if you do not want to receive communications from GEA’s carefully selected partners. FAILURE TO COMPLETE AND RETURN THIS CARD DOES NOT DIMINISH YOUR WARRANTY RIGHTS.
Customers in Canada should consult the yellow pages for the nearest Camco service center, or call 1.888.261.3055. Contact Us If you are not satisfied with the service you receive from GE, contact us on our Website with all the details including your phone number, or write to: In Canada: geappliances.ca, or write to:...