I_)Remove The Room Cabinet; X2Nt Control - GE AZ29E15DABM1 Owner's Manual And Installation Instructions

Otherfeatures of yourZoneline.
Ventilation Control
The ventilation control lever is located at the
upper left side of file Zoneline unit, behind
file room cabinet.
When set at the closed position, only the air
inside the room is circulate(1 and fihered.
When set at the open position, some outdoor
nil-will be &-mvn into the room. This will
reduc( the heating or cooling dlicien_x.
Energy 77p: K eep the vent conn-ol at the closed
position. The room air will be filmrcd and
circulated.
NOTE:Twoshipping screws mustbe removed fromthe
ventdoorbeforeuse Seetbefl}stallation /nstructinns
in thebackof this manua_
Open
position
Closed
position
To Remove the Room Cabinet
Additionul
( ontrols arc lo(ut(d behind
thu
l-OOln
cabinet.
To romove:Pull out at the bottom to rcleas( it
from the tabs (1). Then lift up (9).
To replace: Pla(( th( labs ov(r tile lop rail (l).
Push imvard at the bottom umil it snaps into
[)lace (2).
Air Direction
'Ib a(!iust the air direction, remo_e the room
cabinet. R_move lhe 7 louv_ r scruws that hold
the lomer insert in place. Flip lhe louvcr insert
180°, replace the screws and the room ca/)inet.
Louver s crews
Remove the room cabinet and flip the louver
insert to change the air direction.
Louver s crews
4