Craftsman 316.292600 Operator's Manual page 13

CAUSE
1. Unit is unplugged
2. Starter button or bail improperly used
3. Overload protection switch has popped out
ACTION
1. Make sure that extension cord is securely plugged
into cultivator's cord outlet receptacle on one end
and a 110V outlet on the opposite end.
2. Press starter button and hold it in while squeezing
bail against the handle.
3. Depress overload protection switch. Follow starting
instructions.
NOTE: For repairs beyond the minor adjustments listed above, contact your nearest Sears Parts &
Repair center (1-800-4-MY-HOME ®) or other qualified service dealer for an adjustment.
Ve
O"
Engine Type ........... AC 120 Volts Electric
Operating RPM ............ up to 8,000 rpm
Ignition Switch.R Bail Lock Safety Button
Amperage ............................... 6.5 Amps
Overload Protection ............................................................................................................................ 120 V 5 amp Breaker
Drive Shaft Tube .................... Steel Tube
Handle .................................. Steel Tube
Cultivating Path Width (Maximum) ......................................................................................................... 9 inches (22.86 cm)
Cultivating Depth (Maximum) ................................................................................................................. 6 inches (15.24 cm)
Approximate Weight ..... 27 lb. (12.25 kg)
*All specifications are based on the latest product information available at the time of printing. We reserve the right to
make changes at any time without notice.
13