Advertisement
OPERATION
KNOW YOUR SANDER
Before attempting
to use your sander, familiarize
yourself wffh aft ooerating
features and safety re-
quirements. See Figure 1.
Make sum power supply is 120 volts, 60 Hz, AC only.
DISCONNECT
YOUR
SANDER
FROM
POWER
SUPPLY WHILE ASSEMBLING
PARTS OR MAKING
ADJUSTMENTS.
INSTALLING
AUXILIARY HANDLE
See Figure 2.
An auxiliary handle is packed with your 8antler for ease of
operation. The auxiliary handle can be installed on either
sJdeot tha unlt and must always be used to prevent loss
of control and possible serious injurJ. To Instat1.position
washer into place and start threads into the threaded hole
in the gear housing. Tlghten cap screw securely.
SPINDLE LOCK BuTroN
A spindis lock button has been provided for locking
the spindle of your tool In a stationary
position. It is
located on the side of the gear houefeg as shown in
flgt;re 3. Depress and hold the lock button while _n-
stal,ng,
changing, or removing accessories.
_Do
not engage spendfe Jock whJle spin.
SPfNDLE,
Fig. 3
SWITCH TRIGGER
(RED}
BACK-UP PAD
SWITCHACTUATOR
(OLAC_
AUXILIARY
HANDLE
BACK-UP
DISC
Fig, 1
Page 5
Advertisement
