Taking Pictures (Auto Mode - FujiFilm FINEPIX A820 Owner's Manual

30
Taking Pictures (AUTO Mode)
Flash
When pressing the shutter
button down halfway, []
appears on the LCD monitor
before the flash fires.
Change the flash mode when you want to take pictures without
flash. See p.52 for information on flash.
CAUTION
• Tile irnage shown on tile LCD rnonitor before tile
picture is taken may differ in brightness, color, etc. from
the image actually recorded. Play back the recorded
image to check it (*p.34).
• When selecting a slow shutter speed that will cause
camera shake, t _11 _ appears on the LCD monitor. Use
flash or a tripod.
• See p.125-129 for information on Warning displays.
See "Troubleshooting" (_p.130-135) for more
information.
• Indicator lamp display
The indicator lamp lights or blinks when pressing the
shutter button, etc. The indicator lamp shows the camera
status,
Indicator lamp
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
Lit green Locking the focus
Blinking green Camera shake warning, AF warning,
or AE warning (ready to shoot)
Blinking green and Recording to Memory Card or internal
orange alternately memory (ready to shoot)
Lit orange Recording to Memory Card or internal
memory (not ready)
Blinking orange Charging flash (flash will not fire)
Blinking red Warnings for Memory Card and
internal memory
Card not formatted, incorrect format,
memory full, Memory Card or
internal memory error
Lens operation error
,% MEMO
Detailed warning messages appear on the LCD rnonitor
(_p.125-129).