Loading The Batteries - FujiFilm FINEPIX A820 Owner's Manual

18
Loading the Batteries
_' Checking the battery charge (b CAUTION
• Soil, such as fingermarks on tile poles of tile batteries,
Turn the camera on and check the battery level indicator can shorten time for which the batteries can be used.
on the LCD monitor. • The time for which AA-size alkaline batteries (referred
_!) There is ample battery charge. (Not displayed)
_2_ There is insufficient charge left in the batteries. The
to hereafter simply as alkaline batteries) can be used
varies depending on the brand. Some brands of alkaline
batteries may stop providing power more quickly than
those supplied with the camera. Note also that due to
their nature, the time for which alkaline batteries can be
used decreases in cold conditions (0°C to +10°C/+32°F
to +50°F). For this reason, it is better to use AA-size Ni-
MH batteries.
Due to the nature of the battery, the battery level
indicator (EEl, or _) may appear early when the
camera is used in cold locations. Try warming the
battery in your pocket or a similar location before use.
batteries will soon run out, Have a new set of batteries
ready, (Lit red)
_3)The batteries are depleted, The display will shortly go
blank and the camera will stop working, Replace or
recharge the batteries. (Blinking red)
• Depending on the battery type and the level of charge
in the batteries, the camera may run out of power
without first displaying a battery level warning. This is
particularly likely to happen when batteries that have
run out of charge once are re-used.
• Depending on the camera mode, the transition from
_[_ to _ may occur more quickly.
• See p.119-120 for information on the batteries.
• When first purchased or if left unused for a long period,
the amount of time which AA-size Ni-MH batteries can
be used may be short. See p.120 for more information.
• Battery power consumption varies greatly depending
on use. When you change to Playback mode from
Photography mode, _[_ may not occur, however,
may suddenly blink red and the camera may stop
operation.