FujiFilm FINEPIX A310 Owner's Manual page 20

3
4
The self-timer lamp lights steadily for roughly 5
seconds and then blinks for another 5 seconds,
after which the shot is taken.
,;tTo stop the self4imer, once it has started running, press the
"BACK" button.
A countdown is displayed on the LCD monitor
indicating the time remaining until the picture is
taken.
Self-timer mode is automatically cancelled after
each shot.
_o_o] _l il_ ll[o]l_"][_'t-" [o[o) i I_ [a_
!
This mode can be selected in the "_A", still
photography modes.
Select the continuous shooting mode you want to
use.
2
[]
If you select Continuous Shooting mode (excluding
OFF), the selected mode appears on the LCD
monitor.
_: Top 4-frame Continuous Shooting
_€_: Final 4-frame Continuous Shooting
@ Notes on Using the Continuous Shooting Modes @
• "_'" appears on the LCD monitor during shooting.
• The shots should be taken using the viewfinder.
• The results of the shot are displayed even when "IMAGE DISP." is set to OFF (_*P.50).
• Shooting continues for as long as you hold down the shutter button.
• If there is insufficient space on the xD-Picture Card, as many frames are shot as can be recorded on
the available space.
• The focus and exposure are determined when the first frame is shot and cannot be changed in mid-
sequence.
• The speed of continuous shooting does not change with the quality mode.
• The flash cannot be used as the flash mode is set to Suppressed Flash.
In this mode, you can shoot up to 4 frames at
intervals as short as 0.3 seconds. When you take
the shots, the photographed images are displayed
and automatically recorded.
The time required to record a file is approximately
10 seconds in "O_" mode (for TOP or FINAL 4-frame
continuous shooting).
Max. 25 shots _
Press shutter Release shutter
button |
IUNNNUBBBDI
"--4
Continuous shooting (at a minimum interval of 0.3
seconds) starts when you press the shutter button
and the camera captures the last 4 frames shot
immediately before you release the shutter button.
If the maximum of 25 shutter operations is reached,
the last 4 frames are captured.
If there is insufficient space on the xD-Picture
Card, the camera records as many of the shots
taken just before the shutter button was released
as will fit on the xD-Picture Card.
......@ Focusing on a Moving Subject @ -----_,
If you press the shutter button down halfway to focus on the subject at the starting point _A_, t he subject
may no longer be in focus when it reaches point _B) where you want to take the shot.
In such situations, use AF lock to focus on point _ beforehand and then lock the focus so that it does
not shift (lock pin).
The lock pin feature is also useful for photographing fast-moving subjects that are difficult to focus on.
and the focus is wrong at(_. J
®
Startingpoint
Uselock pin to lock the focus.J
®-
point
where you want to take the picture
38 39