Electrolux E30DD75ESS Use & Care Manual page 11

?ROU GUIDE
[] [] m [] m m [] [] [] [] m m [] [] [] [] [] [] m [] m []
Troub/esheodng , What te check when problems occur
Problem
Nothing works.
Vent intake raises or
lowers partially then
stops.
Gas flame is being
pulled by draw of
vent.
Possible Cause
Vent power supply
interrupted or not energized.
An obstruction is interfering
with the vent intake
movement.
Short duct run or high output of
system make ventilating force
very strong.
Remedy
Have electrician check power
supply, including house circuit
breaker and fuses.
Immediately press Up/Down key
then turn off power to vent and
remove the obstruction. Restore
power to vent and press Up/Down
key to raise or lower intake.
Reduce blower speed to a
lower setting.