Advertisement
Setting Continuous
Bake or 12 Hour Energy Saving
The TIMER ON/OFF
_
and CLEAN
_)
pads control the Continuous
Bake or 12 Hour Energy
Saving features.
The oven
control
has a factory
preset
built-in
12 Hour Energy
Saving
feature that will shut off the oven if the oven control
is left on for
more than 11 hours and 59 minutes.
The oven can be programmed
to override
this feature for Continuous
Baking.
INSTRUCTIONS
PRESS
DISPLAY
To set the control for Continuous
Bake or 12 Hour
Energy
Saving
features:
1.
Press and hold @
for 6 seconds (Fig 1
)
2.
Press _
to switch between the 12 Hour Energy Saving and
continuous bake features. Note: "12 Hh" (Fig. 2) in the display
indicates the control is set for 12 Hour Energy Saving feature
and "- - h" (Fig. 3) indicates the control is set for the Continuous
Bake feature.
3.
Press
to accept the change (Fig. 4) display will return to
time of day) or press @
to reject the change.
for 6 seconds
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Setting
Kitchen
Timer
The TIMER ON/OFF _t_
pad controls tile Kitchen Timer feature. The Kitchen Timer serves as an extra tirner in the kitchen
v
that will beep when the set time has run out. It does not start or stop cooking. The Kitchen Timer feature can be used
during any of the other oven control functions. Refer to "Minumum
& Maximum Control Pad Settings" on page 11 for
time amount settings.
INSTRUCTIONS
PRESS
DISPLAY
To set the Kitchen
Timer
(example
for 5 minutes):
1.
Press _.
(Fig 5).
@
2.
Press the number pads to set the desired time in the display
(example
Press i
. (Fig. 6).
3.
Note: If_
, is not pressed the timer will return to the time of
day.
When the set time has run out, "End" and "TIMER" will show in
the display (Fig. 7). The clock will sound with 3 beeps every 15
seconds until _2_ is pressed.
@
To cancel
the Kitchen
Timer
before
the set time
has
run
out:
Press @.
The display will return to the time of day.
Fig. 6
13
Fig. 7
Advertisement
