Advertisement
•" Even-Cook''
Convection
Oven
Speed
Oven
Timer
dean
light
on/off
Clean
Bake
Start
time
time
1
2
4
5
8
3
6
9
e
Lock
/Off
Controls
Setting the Clock
The CLOCK _
pad is used to set the clock Tile clock may be
set for 12 or 24 hour time of day operation.
The clock has been
preset at the factory for the 12 hour operation.
When the range is
first plugged in, or when the power supply to the range has been
interrupted, the timer in the display will flash the time of day (Fig. 1).
INSTRUCTIONS
To set the clock
(example
below
for
1:30):
1
Press _.
(Fig. 2).
2.
Press _
@
@
pads to set the time of day to 1:30 (Fig. 3).
Press
(Fig. 4).
PRESS
Fig. 1
DISPLAY
Changing
between
12 or 24 hour time of day display:
1.
Press and hold _
for 6 seconds (Fig. 3). CONTINUE holding
the pad until a beep is heard.
2.
3.
4.
The display will show either "12h"(Fig.
5) or "24h"(Fig.
6).
Press _
to switch between the 12 and 24 hour time of day
display. The display will show either "12h" (Fig. 5) or "24h" (Fig.
6).
Press
to accept the desired change or press @
to reject
thechange.
5.
Reset the correct time as described in To set the Clock above.
Please note that if the 24 hour time of day mode was chosen,
the clock will now display time from 0:00 through 23:59 hours.
_for
6 seconds
12
Fig. 2
Fig. 3
Fig.4
Fig. 5
Fig. 6
Advertisement
