Note: The time of
must first be set in order to
To set the Clock
When the range is first plugged in, or when the power supply to the appliance has been interrupted, the display will flash "12:00".
/_i_Jck_'_ (do not hold pad down).
Within 5 seconds, push and hold A or M' until the correct time of day appears in the display.
; Clock +_
\_or,o_o to accept the new time of day. If \_t[lo_!!_:j
is not pressed, the timer will return automatically to the new time of
day after 7 seconds.
Note: The clock cannot be changed during any bake, timed bake, delayed time bake, clean cycle or delayed clean cycle.
12 or 24 Hour Time of Day Display
Press and hold ! _-J_#o
}for 7 seconds. After 7 seconds, "12N r" or "24N r" will appear in the display and the control will beep once.
Press A or V to switch between the 12 and 24 hour time of day display. The display will show either "12Hr" or "24Hr".
Wait 5 seconds or press
to return to the time of day display.
Reset the correct time as described in To set the Clock above. Please note that ifthe 24 hourfime of day mode was chosen,
the clock will now display time from 0:00 through 23:59 hours.
To Set the Minute Timer
Press A to increase or V to decrease the time in one minute increments. The timer can be set for any amount of time
from 1 minute to 11 hours and 59 minutes.
will count down in seconds.
When the set time has run out, the timer will beep 3 times. It will continue to beep 3 times every 8 seconds until _i, 1,_f/is
Note: The indicator light located above the TIMER ON/OFF pad will glow while the minute timer is active.
Note: The minute timer does not start or stop cooking. It serves as an extra timer in the kitchen that will beep when the set time
has run out. The minute timer can be used alone or during any of the other oven functions. When the minute timer is in use with
any other mode, the minute timer will be shown in the display. To view other functions, press the function pad for that mode.
To Cancel the Minute Timer before the set time has run out: Press _o,,Jof,_
For a silent
When choosing a function, a beep will be heard each time a pad is pushed. If desired, the controls can be programmed for silent
_i _' . i,t_i_ for 7 seconds,
or "SP" appears in the display.
To tell if your oven is set for normal or silent operation push and hold ,o,_o,,o
Within 5 seconds, press A or V to switch between normal sound operation and silent operation mode. The display will show
either %="or"SP". Wait 5 seconds to return to normal operating mode. Note: If "SP" appears, the control will operate with normal
sounds and beeps. If % -" appears, the control is in the silent operation mode.
The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be programmed
for any temperature from 170 °F to 550 °F (77°C to 288°C).
To change the temperature
to °C (Celsius)
or from °C to °F (control
not be in a Bake or Clean mode):
Press and hold
,or 7 seconds until °F or °C appears in the display.
change °Fto °C or °C to °F.
Wait 5 seconds to accept the changes or press / o,,Jofd to accept the changes.