Craftsman 917.271550 Owner's Manual
  1. Manuals
  2. Brands
  3. Craftsman Manuals
  4. Lawn Mower
  5. 917.271550
  6. Owner's manual
Craftsman 917.271550 Owner's Manual

Craftsman 917.271550 Owner's Manual

Lawn tractor 15.5 hp, 42" mower electric start 6 speed transaxle
Hide thumbs
Table of Contents

Advertisement

Quick Links

Owner's Manual
J CRAFTSMI N°J
LAWN TRACTOR
15.5 HP, 42" Mower
Electric Start
6 Speed Transaxle
Model No.
917.271550
This product has a low emission engine which operates
differently from previously
built engines. Before you start the
engine, read and understand this Owner's Manual.
CAUTION:
Read and follow all Safety
Rules and Instructions before
operating this equipment.
For answers
to your questions
about this product,
Call:
1-800-659-5917
Sears Craftsman Help Line
5 am - 5 pro, Mon - Sat
Sears, Roebuck and Co., Hoffman Estates, II 60179 U.S.A.
Visit our Craftsman
website:www.sears.com/craftsman

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 917.271550 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Craftsman 917.271550

Summary of Contents for Craftsman 917.271550

  • Page 1 Read and follow all Safety about this product, Call: 1-800-659-5917 Rules and Instructions before operating this equipment. Sears Craftsman Help Line 5 am - 5 pro, Mon - Sat Sears, Roebuck and Co., Hoffman Estates, II 60179 U.S.A. Visit our Craftsman website:www.sears.com/craftsman...
  • Page 2 Sears Service...... B ack Cover LIMITED TWO YEAR WARRANTY ON CRAFTSMAN RIDING EQUIPMENT PARTS For two (2) years from the date of purchase, if this Craftsman Riding Equipment is maintained, lubricated and tuned up according to the instructions in the owner's manual, Sears will repair or replace, free of charge, any parts found to be defective in material or workmanship.
  • Page 3 IMPORTANT: Th scutt ng mach ne s capable of amputating hands and feet and throwing objects. Failure to observe the following safety nstructions could result in serious injury or death. • Do not mow in reverse unless absolutely ,_l, Look for this symbol to point out necessary.
  • Page 4 • Never carry children. They may fall off and be seriously injured or interfere • Mow up and down slopes, not across. with safe machine operation. • Remove obstacles such as rocks, tree • Never allow children to operate the limbs, etc.
  • Page 5 • Remove obstacles such as rocks, tree • Be sure the area is clear of other limbs, etc. people before mowing. Stop machine if • Watch for holes, ruts, or bumps. anyone enters the area. Uneven terrain could overtum the •...
  • Page 6 REPAIR AGREEMENT PRODUCT SPECIFICATIONS A Repair Agreement is available on this Gasoline 1.25 Gallons product. Contact your nearest Sears store for details. Capacity Unleaded and Type: Regular CUSTOMER RESPONSIBILITIES Oil Type: SAE 30 (above 32°F) • Read and observe the safety rules. IAPI-SF-SJ): SAE 5W-30 (below 32°F...
  • Page 7 Steering Wheel Steering Wheel Steering Steering Extension Adapter Sleeve Shaft © (1) Hex Bolt 3/8-16 x 1 © (1) Lock washer (1) Large Flat Washer (1) Hex Bolt 5/16-18 x 1-1/4 Locknut 5/16-18 Seat (1) Washer 17/32 x 1-3/16 x 12 Gauge _'_! (1)Knob Video Cassette...
  • Page 8 Yournew tractor has been assembledat the factory with the exception of those parts left unassembled for shipping purposes. To ensure safe and proper operation of your tractor all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to insure proper tightness. Review the video cassette before you begin.
  • Page 9 NOTE: You may now roll or drive your Seat tractor off the skid. Follow the appropriate instruction below to remove the tractor from the skid. Label TO ROLL TRACTOR OFF SKID (See Operation section for location function of controls) 1. Press lift lever plunger and raise attachment lift lever to its highest position.
  • Page 10 4"CHECKLIST CHECK TIRE PRESSURE The tires on your tractor were overinflated Before you operate your new tractor, we at the factory for shipping purposes. wish to assure that you receive the best Correct tire pressure is important for best performance and satisfaction from this Quality Product.
  • Page 11 These symbols may appear on your tractor or in literature supplied with the product. Learn and understand their meaning. BATTERY CAUTION OR REVERSE FORWARD FAST SLOW WARNING ENGINE ON ENGINE OFF OIL PRESSURE LIGHTS ON OVER TEMP LIGHT FUEL CHOKE MOWER HEIGHT PARKING BRAKE UNLOCKED...
  • Page 12 KNOW YOUR TRACTOR READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR Compare the illustrations with your tractor to familiarize yourself with the locations of various controls and adjustments. Save this manual for future reference. Attachment Clutch Ignition Switch Ammeter Lever Lever...
  • Page 13 The operation of any tractor result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields while operating your tractor or performing adjustments or repairs. We recommend standard safety glasses or a wide vision safety mask worn over spectacles.
  • Page 14 These heights are approximate and may • If slowing is necessary, move throttle vary depending upon soil conditions, control lever to slower position. • If stopping is absolutely necessary, height of grass and types of grass being mowed. push clutch/brake pedal quickly to •...
  • Page 15 ADD GASOLINE Insert key into ignition and turn key clockwise to start position and release • Fill fuel tank to bottom of tank filler key as soon as engine starts. Do not neck. Do not overfill. Use fresh, clean, run starter continuously for more than regular unleaded...
  • Page 16 MOWING TIPS • If grass is extremely tall, it should be mowed twice to reduce load and • Mower should be properly leveled for possible fire hazard from dried clip- best mowing performance. See 'q'O LEVEL MOWER HOUSING" in the pings.
  • Page 17 FILL ,.DATES ,s coo Check Brake Operation I I1_ Check Tire Pressure If / Check Operator Presence and Interlock Systems check for Loose Fasteners SharperVReplace Mower Blades Lubricatio_ Chart qk _ Check Batter'/Level Clean Battery and Terminals Check Transax_e Cooling Check V-Belts Check Engine Oil Level V w i...
  • Page 18 TRACTOR IMPORTANT: To ensure proper assembly, center hole in blade must align with star Always observe safety rules when on mandrel assembly. performing any maintenance. 4. Reassemble hex bolt, lock washer BRAKE OPERATION and flat washer in exact order as shown.
  • Page 19 BATTERY NOTE: Although multi-viscosity oils (5W30, 10W30 etc.) improve starting Your tractor has a battery charging system cold weather, these multi-viscosity oils which is sufficient for normal use. How- will result in increased oil consumption ever, periodic charging of the battery with when used above 32°F.
  • Page 20 ENGINE COOLING FINS AIR FILTER Your engine will not run properly using a Remove any dust, dirt or oil from engine dirty air filter. Clean the foam pre-cleaner cooling fins to prevent engine damage after every 25 hours of operation or every from overheating.
  • Page 21 CLEANING We do not recommend using a garden hose to clean your tractor unless the • Clean engine, battery, seat, finish, etc. electrical system, muffler, air filter and of all foreign matter. carburetor are covered to keep water out. • Keep finished surfaces and wheels free Water in engine can result in a shortened...
  • Page 22 FRONT-TO-BACK ADJUSTMENT Connect suspension arms to rear IMPORTANT: Deck must be level side-to deck brackets and secure with retainer springs. side. If the following front-to-back adjust- Connect anti-sway bar to chassis ment is necessary, be sure to adjust both bracket and secure with retainer front links equally...
  • Page 23 TO REPLACE MOWER BLADE DRIVE Road test tractor for proper stopping BELT distance as stated above. Readjust necessary. If stopping distance is still The mower blade drive belt may be greater than six (6) feet in highest replaced without tools. Park the tractor on gear, further maintenance...
  • Page 24 TO START ENGINE WITH A WEAK BELT INSTALLATION - 1. Carefully work new belt down be- tween transaxle belt keepers and onto RNING: Lead-acid batteries the input pulley. generate explosive gases. Keep sparks, 2. Slide belt into the center span keeper. flame and smoking materials away from 3.
  • Page 25 REPLACING BATTERY TO REPLACE FUSE Replace with 20 amp automotive-type ,_WARNING: Do not short battery plug-in fuse. The fuse holder is located terminals by allowing a wrench or any behind the dash. other object to contact both terminals at TO REMOVE HOOD AND GRILL AS- the same time.
  • Page 26 FINAL SE'n'ING Check that holes "A" in governor control lever and hole in governor plate line-up. 1. Start engine and allow to warm for five if holes "A" are not aligned, loosen clamp minutes. Make final adjustments with screw and move throttle cable until holes engine running and shift/motion control are aligned.
  • Page 27 Also, alcohol blended fuels (called Immediately prepare your tractor gasohol or using ethanol or methanol) storage at the end of the season or if the can attract moisture which leads to tractor will not be used for 30 days or more.
  • Page 28 TROUBLESHOOTING CHART: See appropriate section in manual unless directed to Sears service center PROBLEM CAUSE CORRECTION 1. Fill fuel tank. 1. Out of fuel. Will not start 2. See "TO START ENGINE" Engine not "CHOKED" in Operation section. properly. 3. Wait several minutes Engine flooded.
  • Page 29 TROUBLESHOOTING CHART: See appropriate section in manual unless directed to Sears service center PROBLEM CAUSE CORRECTION Loss_power Cutting too much grass/too 1. Set in "Higher Cut" position/ fast. reduce speed. Throttle in "CHOKE" Adjust throttle control. position. Clean underside of mower Build-up of grass, leaves...
  • Page 30 TROUBLESHOOTING CHART: See appropriate section in manual unless directed to Sears service center CAUSE CORRECTION PROBLEM 1. Remove obstruction. Mower blades will I1. Obstruction in clutch mechanism. not rotate Worn/damaged mower Replace mower drive belt. drive belt. i3. Frozen idler pulley. 3.
  • Page 31 TRACTOR - MODEL NUMBER 917.271550 SCHEMATIC BAI_ERY AMMETER FUSE STARTER (OPTIONAL) i .._ _ _ CLUTCH / BRAKE " G (PEDAL UP) _rrE IGNITION (NOT OCCUPIED) SWffCH • SEATSWITCH BU,_K f ,GE • BACK NT CLUT GROUNDING mAcx (CLUTCH OFF) CONNECTOR (OPTIONAL) B_J_CK...
  • Page 32 TRACTOR - MODEL NUMBER 917,271550 ELECTRICAL...
  • Page 33 Nut Keps Hex 1/4-20 Unc 4207J Cable Ground 6ga 12" black 121305X Switch Plunger Nc Gray 175566 Switch Ign Delta Push-in 140403 Key Ign Molded Craftsman, Delta 179720 Harness Ign 71110408 Bolt BIk Hex 1/4-20unc x 1/2 131563 CoverTerminal Red 178861...
  • Page 34 TRACTOR - MODEL NUMBER 917.271550 CHASSIS AND ENCLOSURES _p 5 °i...
  • Page 35 TRACTOR - MODEL NUMBER 917.271550 CHASSISAND ENCLOSURES PART DESCRIPTION 174620 Chassis Lt Stamping Drawbar 176554 Screw 3/8-16 x 3/4 17060612 t 55272 BumperHood/Dash 174643X010 Saddle SLKSCRE FLT SDL 126471X Clip Insulator .406 Mtg Hole 168345X010 Dash Stkscr PIm Mash Sym 72140608 Bolt RdHd Sqnk.
  • Page 36 TRACTOR - MODEL NUMBER 917.271550 GROUND DRIVE 62 _ 35 36...
  • Page 37 TRACTOR ..- MODEL NUMBER 917.271550 GROUND DRIVE KEY PART KEY PART NO. NO. DESCRIPTION NO. NO. DESCRIPTION STD523715 Bolt Hex Hd 3/8-16unc x 1-1/2 Transaxle (See Breakdown) Peedess 206-545C STD541437 NutCrownlock 3/8-16UNC 146682 Spring Retum Brake T/a Zinc STD541431 Nut Crown Lock 5/16-18 123666X Pulley Transaxle 18/20"...
  • Page 38 TRACTOR - MODEL NUMBER 917.271550 STEERING r""--_ _'°7"_" r 43 6 _i_ ¸...
  • Page 39 TRACTOR - MODEL NUMBER 917.271550 STEERING PART DESCRIPTION 139768 Wheel Steering Opp Sears BIk Axle Asm Front 175131 169840 Spindle Asm Lh 169839 Spindle Asm Rh 6266H Washer Thrust .75 x 1.230 121748X Washer 25/32 x 1-5/8 x 16 Ga. Washer 27/32 x 1-1/4 x 16 Ga.
  • Page 40 TRACTOR - MODEL NUMBER 917.271550 ENGINE _.._ _l+i _--_-- I '_'t+ls OPTIONAL EQUIPMENT Spark Arrester...
  • Page 41 TRACTOR - MODEL NUMBER 917.271550 ENGINE PART DESCRIPTION 170545 Control TlYch 17720408 Screw Hex Thd Cut 1/4-20 x 1/2 ..Engine (See Breakdown) Briggs, Model No28U707-1112-E1 137352 Muffler Exh LT B&S 14HP IC OHV 165291 Gasket Eng 1 313 Id Tin Plated 13280324 Nipple Pipe 3/8 NPT x 3 1320O300...
  • Page 42 TRACTOR - MODEL NUMBER 917.271550 SEAT ASSEMBLY PART PART DESCRIPTION DESCRIPTION 140122 Seat 121248X Bushing Snap BIk Ny150 Id 140551 Bracket Pvt St Bolt Rdhd Sht Nk 1/4-20x1-1/2 72050412 71110616 Bolt Fin Hex 3/8-16unc X 1 134300 Spacer Split 28x 96 Yet Zinc 19131610 Washer Flat 13/32 X 1 X 10 Ga 121250X...
  • Page 43 Pad Footrest LH Domestic 179769)(428 Pad Footrest RH 181412 °. Decal Replcmnt 138311 Decal Handle LftHeight Adjust 1632O4 Decal Fender Craftsman White 181269 Manual Owners English 149516 Decal Battery Dngr/Psn Eng 181270 Acme Manual Owners Spanish WHEELS AND TIRES PART...
  • Page 44 TRACTOR - MODEL NUMBER 917.271550 LIFT ASSEMBLY 32 "...
  • Page 45 TRACTOR - MODEL NUMBER 917.271550 LIFTASSEMBLY PART DESCRIPTION 159460 Wire Asm Inner/Sprg W/plunger LT 159471 Shaft Asm Lift 105767X Pin Groove 1 500 Zinc 12000002 E Ring#5133-62 19211621 Washer Pltd 21/32 X 1 X 21ga 120183X Bearing Nylon BIk 629 Id 125631X Grip Handle Fluted BIk 122365X...
  • Page 46 TRACTOR - MODEL NUMBER 917.271550 MOWER DECK 01.67 154_ _143 _" 159 -._ il 47 10--.--< 9 "-"_...
  • Page 47 TRACTOR - MODEL NUMBER 917.271550 MOWER DECK KEY PART KEY PART DESCRIPTION NO. NO. DESCRIPTION 165892 Mower Deck Assembly, 42" 133944 Washer, Hardened STD533107 Bolt 174284 Roller Assembly, Cam 138017 Follower Bracket Assembly,Sway Bar, Front 131340 Bolt, Shoulder #10-24 Grade 5 16546O Bracket Sway Bar 38/42"...
  • Page 48 TRACTOR - MODEL NUMBER 917.271550 PEERLESS TRANSAXLE-MODEL NUMBER 206-545C 0 _71B 7O 6A...
  • Page 49 TRACTOR - MODEL NUMBER 917.271550 PEERLESS TRANSAXLE--MODEL NUMBER 206-545C KEY PART PART DESCRIPTION DESCRIPTION 772147 Transaxle Cover 790079 Brake Lever Screw 1/4 - 20 x 1-1 /4" 780086A Needle Bearing 5/8" 792073A 770128 Transaxle Case 792085A Screw 1/4 - 20 x 2 1/4" 776395 Countershaft 792075...
  • Page 50 TRACTOR - MODEL NUMBER 917.271550 BRIGGS & STRAI-I'ON ENGINE-MODEL NUMBER 28U707, TYPE NUMBER 1112-EI 914_' 1026 ..1095 VALVE GASKET SET 866_ _r REQUIRES SPECIALTOOLS 1022 TO INSTALL. SEE REPAIR INSTRUCTION MANUAL. 11019 LABEL KIT 11058 OWNER'S MANUAL I...
  • Page 51 TRACTOR - MODEL NUMBER 917.271550 BRIGGS & STRATrON ENGINE-MODEL NUMBER 28U707, TYPE NUMBER 1112-E1 875J 711_ 344_ "JrREQUIRES SPECIAL TOOLS TO INSTALL. SEE REPAIR INSTRUCTION MANUAL 95 #' 231 v _ I 987 ® f 634_] 142U lo5 121 CARBURETOR OVERHAUL KIT 358 ENGINE GASKET SET 104,_1270 278 _ 987®...
  • Page 52 TRACTOR - MODEL NUMBER 917.271550 BRIGGS& STRATTON ENGINE-MODEL NUMBER28U707,TYPE NUMBER1112-E1 3091 697_ ._,,.__ 462 @ 305_ 934_ 1006_ 1005_ 287 ,_ 733_ 1051 _ 783__ 1036 EM!SSIONS LABE L...
  • Page 53 TRACTOR - MODEL NUMBER 917.271550 BRIGGS& STRATrONENGINE-MODEL NUMBER28U707,TYPENUMBER1112-E1 NIKKI 141B j,_ _ 121A CARBURETOR OVERHAUL 130A (_ 95A _P 633c._ ga7A@ 1133AI 104A_ 95A_ 276A_o 104A,_ 127A lO5A $ 967A ® 137A O 231A_ 977A CARBURETOR GASKET SET lO,A_ 2,6A o 137AQ 276A_ 947A...
  • Page 54 TRACTOR - MODEL NUMBER 917.271550 BRIGGS & STRATI'ON ENGINE-MODEL NUMBER 28U707, TYPE NUMBER 1112-E1 PART PART DESCRIPTION DESCRIPTION 496412 C_linder Assembly 690464 Valve-Choke (Manual Choke) 399265 Kit-Bushing/Seal 108A 692344 Valve-Choke (Choke A Matic) 391086 • Seat-Oil (Magneto Side) 108B 695419 Valve-Choke 494236 Sump-Engine...
  • Page 55 TRACTOR - MODEL NUMBER 917.271550 BRIGGS & STRATrON ENGINE-MODEL NUMBER 28U707, TYPE NUMBER 1112-E1 PART PART DESCRIPTION DESCRIPTION 305A 692127 Screw (Blower Housing) 789A 695050 Harness-Wiring 690499 Shield-Cylinder 693167 Nut (Brush Retainer) 691003 Screw (Cylinder Shield) 691429 Cap-Drive 693551 Motor-Starter 691286 Cap-End 690323...
  • Page 56 NOTES...
  • Page 57 NOTES...
  • Page 58 NOTES...
  • Page 59 SUGGESTED GUIDE FOR SIGHTING SLOPES FOR SAFE OPERATION 1. Fold this page along dotted line indicated above. 2. Hold page before you so that its left edge is vertically parallel to a tree trunk or other upright structure. 3. Sight across the fold in the direction of hill slope you want to measure. 4.
  • Page 60 1-800-488-1222 For the replacement parts, accessories and owner'smanuals that you need to do-it-yourself, call Sears PartsDirectSM! 1-800-366-PART 6a.m.- 11 p.m., 7days aweek (1-800-366-7278) (U.S.A. only) _.sears.corn/_irect To purchase or inquire about a Sears Service Agreement or Sears Maintenance Agreement: 1-800-827-6655 (u.s._) 1-800-361-6665 (Canada)

Table of Contents

Save PDF