Advertisement
Setting
the Clock
The CLOCK _
pad is used to set the clock. The clock may be
set for 12 or 24 hour time of day operation.
The clock has been
preset at the factory for the 12 hour operation.
When the appliance
is first plugged in, or when the power supply to the appliance has
been interrupted, the clock in the display will flash (See Fig. 1).
INSTRUCTIONS
To set the clock
(example
below
for 1:30):
1.
Press _.
"CLO" will appear in the display (See Fig. 2).
,
Press (_
(_)(_
pads to set the time of day to 1:30 (See
Fig. 3). Press
_. "CLO" will disappear and the clock will start
(See Fig. 4).
Changing
between
12 or 24 hour time of day display:
1.
Press and hold _
for 6 seconds untill "12h" or "24h" appears
in the display.
2.
Press _
to switch between the 12 and 24 hour time of day
display.
"12h" or "24h" will be displayed
(See Figs. 5 or 6).
3.
Press I
to accept the desired change or press _
to reject
thechange.
4.
Reset the correct time as described in To set the clock above.
Please note that if the 24 hour time of day mode was chosen,
the clock will now display time from 00:00 through 23:59 hours.
PRESS
_for
6 seconds
Fig. 1
DISPLAY
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Setting
Silent
Control
Operation
The DELAY START _and
FLEX CLEAN _cc_
pads control the Silent Control operation feature. The Silent Control
operation feature allows the oven control to be operated without sounds or beeps whenever necessary. If desired the control
can be programmed for silent operation and later returned to operating with all the normal sounds and beeps.
INSTRUCTIONS
PRESS
DISPLAY
To change
control
from
normal
sound
to silent
control
operation:
1.
To tell if your range is set for normal or silent operation press
for 7seconds
and hold _s_,_) for 6 seconds. (See Fig. 7)
d
2.
Press _
to switch between normal sound operation and silent
operation mode. The display will show either "SP" (See Fig. 8)
or "= =" (See Figs. 2 or 3).
,
If "SP" appears (See Fig. 2), the control will operate with normal
sounds and beeps. If" ==" appears (See Fig. 9), the control is
set for silent operation mode.
Press I
to accept the change or press _b
to reject the
change.
11
Fig. 7
Fig. 8
Fig. 9
Hide quick links:
Advertisement
