Oki OKIPAGE 14EX Service Manual page 80

Service Manual for OKIPAGE 14ex Page: 29
Chapter 3 Disassembly
3.3.3 Operator Panel Assy
(1) Unlock two latches on the upper cover from the rear side, lift the operator panel assy (1) from the back and remove it.
(2) Remove the Sumi card (operator panel) (2) from the connector (CN1) (3).
Note:
You can remove the operator panel assy while the upper cover installed on the unit. However, it is much easier to remove the panel assy after removal of
upper cover.