Frigidaire Gallery 600 Series Use & Care Manual page 8

Operating Instructions (continued)
No Heat Dry
NO HEAT DRY option saves electricity since the
heating element is off during drying portion of
cycle. When selected, the light above the pad
will come on and remain on until end of cycle.
To speed the drying process, open the door
slightly after the cycle is complete. Some water
droplets may remain on door and tub and in
areas where dishes touch silverware basket and
rack.
To select heated dry, press the pad a second
time. The light above the pad will turn off.
Heated dry provides faster drying since the
heating element is on during the drying
portion of the cycle. With either option, a fan
circulates the air inside the dishwasher to
speed drying.
You may see water vapor coming from the vent
during the dying portion of the cycle. The vent
is closed during washing to hold moisture and
sound inside and then opens for drying. The
drying option may be changed at any time
during the cycle and affects only the drying
period.
Opening the door longer than one minute
during the dry cycle cancels the selected dry
program.
Delay Start
The DELAY START option allows you to delay
starting your dishwasher up to 9 hours.
Press the DELAY START pad until the desired
delay time shows in the STATUS window.
To cancel the DELAY START option and begin
the cycle before the delay period is over, press
the START/CANCEL pad.
To Cancel a Cycle
You can cancel a cycle anytime during the
cycle. Press START/CANCEL pad and the
dishwasher will start a 90 second drain. At the
end of the drain, select the desired cycle.
Note: To start the dishwasher using the
same cycle and options selected on the
previous wash, just press the START/
CANCEL pad.
Status Indicator Lights
When the ADD-A-DISH light is on, you can add
additional items.
The WASHING light comes on at the beginning
of cycle and remains on until the end of the
main wash.
The RINSING light will come on and remain
on during the last two rinses of all cycles.
The DRYING light indicates the drying portion
of the cycle. The light will come on when either
drying option is selected.
The CLEAN light will come on at end of cycle
and remain on until door is opened.