Frigidaire Gallery 600 Series Use & Care Manual page 5

Operating Instructions (continued)
Cycle Chart
Cycle Description To Select Cycle Water Time Washes/
(approx.) (approx.) Rinses
Pots & For pots, pans, • Turn dial to POTS & PANS/ 7.2 gal. 81 min.* 2 washes
Pans casseroles, and ttEAVY WAStt. 6.0 imp. gal. 4 rinses
dinnerware with • Select ttI-TEMP WASII ON 27.3 liters
dried-on or baked- option.
on soils. • Select other desired OPTIONS.
Heavy For heavily soiled • Turn dial to POTS & PANS/ 7.2 gal. 81 min.* 2 washes
Wash dishes and ttEAVY WAStt. 6.0 imp. gal. 4 rinses
silverware. • Select desired OPTIONS. 27.3 liters
Normal For regularly soiled • Turn dial to NORMAL WASH. 6.0 gal. 75 min.*" 2 washes
Wash dishes and • Select desired OPTIONS. 5.0 imp. gal. 3 rinses
silverware. 22.7 liters
Short For lightly soiled or • Turn dial to SttORT WASIt. 4.8 gal. 67 min.* 1 wash
Wash pre-rinsed dishes • Select desired OPTIONS. 4.0 imp. gal. 3 rinses
and silverware. 18.2 liters
Rinse/ For rinsing dishes ° DO NOT USE detergent. 1.2 gal. 4 min. 1 rinse
Hold that will be washed ° Turn dial to RINSE_tOLD. 1.0 imp. gal.
later. 4.5 liters
• Includes dry time.
Energy Options
Hi-Temp Wash Option
When HI-TEMP WASH ON option is selected,
the dishwasher heats water in main wash to
approximately 140°F (60°C). Wash action will
continue but tinter will not advance until
proper temperature is reached. The hotter
water provided by this option helps activate
dishwasher detergent to clean food grease and
soil front dishes. HI-TEMP WASH ON option
can be used with any cycle except RINSE HOLD
and PLATE WARMER.
To turn off option, select HI-TEMP WASH OFF.
Hi-Temp Rinse Option
When HI-TEMP RINSE ON option is selected,
the dishwasher heats water in final rinse to
approximately 140°F (60°C). This will speed
drying and reduce spotting. HI-TEMP RINSE
ON option can be used with any cycle except
RINSE HOLD and PLATE WARMER.
To turn offoption, select HI-TEMP RINSE OFF.
Heated Dry Option
HEATED DRY ON option provides faster drying
since the heating element is on during the
drying portion of cycle.
HEATED DRY OFF option saves electricity since
the heating element is off" during drying
portion of cycle. With either option, a fan
circulates air inside the dishwasher to speed
drying. You may wish to open the door slightly
after the cycle is complete since some water
droplets may remain on door and tub and in
areas where dishes touch silverware basket and
rack.
With either option, you may see water vapor
coming front vent during drying portion of
cycle. The vent is closed during washing to
hold moisture and sound inside and then
opens for drying.
The drying option may be changed at any time
during the cycle and affects only the drying
period.
Status Indicator Lights
When DELAY START option is selected, the
DELAY START light will glow as timer counts
down to begin cycle.
The HEATING DELAY light means the cycle is
being extended to heat water to proper
temperature in the main wash or final rinse,
based on options selected.
CLEAN light comes on when a cycle is
complete. To turn it off, turn dial slightly until
light goes off'.