Table of Contents
Advertisement
Operating
Instructions
(continued)
TO CHANGE TEMPERATURE
DISPLAY:
temp/timer
A
V
DO THIS:
,
PRESS AND HOLD THE
UP/DOWN BUTTONS
-TOGETHER
FOR 3 SECONDS
YOU WILL SEE:
temp/timer
A
V
Note: The control is capable of displaying temperature
in degrees Fahrenheit or degrees Celsius.
TO TURN UNIT OFF:
temp/timer
A
V
%
auto
[] hi
med
lo
®
DO THIS;
PRESS
ON/OFF BUTTON
YOU WILL SEE:
temp/timer
A
m
v
auto
hi
med
lo
®
ADDITIONAL
THINGS
YOU SHOULD KNOW
Now that you have mastered the operating procedure, here are more features in your control that you should become familiar with.
• The "Cool" circuit has an automatic 3 minute time delayed start if the unit is turned off and on quickly.
/_
This prevents overheating of the compressor and possible circuit breaker tripping. The fan will continue
\
to run during this time.
•
There is a 2-Second delay for the compressor shutting down when selecting FAN ONLY. This is to cover the possibility of having
to roll through to select another mode.
• The control will maintain the set temperature
within 2 degrees Fahrenheit, between 60F and 90F degrees.
• After a power outage, the unit will memorize the last setting and return the unit to the same setting once power is restored.
EXHAUSTCONTROL
cool,,
energy saver
#n only
closed
exhaust
open
temp/timer
A
V
auto
[] hi
med
lo
®
This Exhaust Control allows the air conditioner to either recirculate inside air (CLOSED) or exhaust air to the outside (OPEN).
The CLOSED position is used when maximum cooling is desired. It may also be used for air recirculation without cooling when the
air conditioner is set in any FAN position.
The OPEN position removes stale air from the room and exhausts it to the outside. Fresh air is drawn in through normal passages
in the home.
02009
Electrolux Home Products, Inc.
All rights reserved,
f_
Advertisement
Table of Contents
