Safety Instructions; Important Safety Instructions& Guldef=Ne - Craftsman 921.153101 Owner's Manual

Safety Instructions
The informatton hated below should be read and
understood by the operator. Th=s mformation is given to
_rote= the user while operating and stodng the air
n.J[_:lll I Ilia,
Indicates an immlnerltly h azardous situationwhip, h, if not
avoided, w illresultin deathor serious tnjury.
ind|cstea • potentially hazardous situa'donwhich,if not
e, volded,couldresultin death or serousinjury
_ompmsSor. We utilize the symbols below to allow the
reader to recogntza important information about their
safety
]ndtcates a potent=allyhazardous situation which, if not
avoided, may result =n minoror moderate injury
When used without the ssfaty start symbol indicates a
potentiallyhazardous situation which, if not=,voided, may
dam %
= •
Important Safety lnstructions and Guidelines
• Save all Instructions
V:_ _l_/-l=l_ll_[ll
tmpmperoperat=on or maintenance of the=produd_ couldresultin serious Injuryend/orpropertydamage.Read end
understand ell of the warnings and safetyinstructions p rovided beforeusingth_ equipment,
Risk of Moving Part s
Risk of Burns
Risk of Falling
Risk from
Rylng Objects
The air compressorshould be operated on • dedicated 15 amp €lmult. If the circuit does
not have 15 flee _nps available, a larger circuit must be used. Always use more sir
-hose before utilizingextension cords. AMexte_'_lencords used must be 12 gauge wi_
e maxtmum length of 25 P..The circuit fusetype must be e time delay. Low voltage could
cause damage to the motor.
If the sit €ompressor Is In operation, ell guards and covers should be attached or
installed correctly, If any guard or cover has been damaged, do not operate the
-equipment until the proper personnel has correctly repaired the aqulpmenL The power
-cord should be flee of any moving ptrts, twistingandlor crimping while in use and while
in ston_ge.
There are surfaces on your air compressor that white in operation end thereafter can
-cause serious burns If touched, The equipment should t_e allowed time to cool before
any maintenance is attempted. Iterr_ such _ the compressor pump andthe outlet tube
are normallyhot during and after operttJon.
Operation of the air compressor should always be in a position that ts at'J_la. Never use
the air compressor on a rooftop or elevated position that could allow the unit to fell or
-be tipped over. Use additional sit hose for elevated jobs.
Alwayswear ANSI Z87,1 approvedsafety glasseswith side shields when the air
compressor is in use. Turn off the air compressor and drain the air tank before
perfownlnganytypeof maintenance o r disassembly of thehosesor fittings, N everpoint
any nozzleorsprayertoward any pe_lofthe bodyor at otherpop_pie or animals.
r
t