Frigidaire CRA065AT711 Use & Care Manual page 9

Table of Contents

Advertisement

Operating
Instructions
(continued)
REMOTE SENSING
FEATURE
i
DO THIS;
PRESS REMOTE
SENSING
START BUTTON
dean
air
LIGHT
pulsing
( On & Off intermittently
).
cool
remote
econ
sensing
C
fan only
m
timer
MODE
V
ON=OFF
A
NOTE: Unit display shows the set temperature
NOTE:
Remote
display
is actual temperature
Note: This feature can be activated
from the remote control
ONLY, the unit must be in a cooling mode.
at remote
control
only
To activate
the remote sensing
feature,
point the remote control
towards
the unit and press the remote sensing
Start button.
Next, use
the"
A V "buttons
to set the desired temperature
at the remote.
(Note that the set temperature
wilt only be displayed
on the unit
itself ). The LIGHT on the unit control
will pulse to indicate
it received the signal. The LIGHT on the remote
control will pulse each time it
sends a signal.
It will periodically
send this signal until the feature
is deactivated
by pressing the remote sensing Stop button,
tf the unit
does not receive the remote sensing signal during
any 3 minute
interval,
the unit wilt beep to indicate
the remote sensing
mode has
ended. The display on the remote control
indicates
the temperature
at the remote ONLY.
NOTE: The Remote Sensing function
is terminated
either
by using the Remote
Sensing Stop button
or the main ON/OFF button
on the
unit.
FAULT CODES;
remote
sensing
temp/timer
auto [] I
medhi
fitter
lo
reset
V
ON=OFF
A
FAN SPEED
steep
remote
sensing
temp/timer
auto []
medhi
fitter
lo
reset
V
ON=OFF
A
FAN SPEED
steep
If the display reads "AS", a sensor has failed. Contact your
Authorized Frigidaire Service Center.
If the display reads "ES", a sensor has failed. Contact your
Authorized Frigidaire Service Center.
TO CHANGE TEMPERATURE
DISPLAY:
remote
sensing
V
temp/timer
auto
i
hi.
fitter
reed
lo
reset
ON-OFF
A
FAN SPEED
steep
/DO THIS:
PRESS AND HOLD THE
UP/DOWN
BUTTONS
TOGETHER
FOR 3 SECONDS
YOU WILL SEE;
remote
sensing
ternp/timer
auto
i
hi.
fitter
reed
Io
reset
V
ON-OFF
A
FAN SPEED
steep
Note: The control
is capable
of displaying
temperature
in
degrees
Fahrenheit
or degrees
Celsius.
@2009
Electrolux
Home Products,
Inc.
All rights
reserved.

Advertisement

Table of Contents
loading

Table of Contents