Fault Codes - Fisher & Paykel DD603-88445B User Manual

How to Recognizea Fault How toAttend to a Fault
Code
Whena fault hasoccurred,the
DishDrawe¢ _ will continuously
beepeverysecond.
Thefault codewill be displayed
on the Electronic Displayfor
prefinished andon the inside
controlpanelfor integrated
models.
Eachfault codeis shown in the
chart belowfor prefinished and
integratedmodels.
Code
1. Pressthe POWER button to
removethe fault code.
2. If the fault codeand
continuous beepscannotbe
removedby pressing the POWER
button,turn the poweroff at the
powersupply.
4. After attendingto the fault,
turn the DishDrawe¢ _ on at the
powersupply.
5. If the fault codeand
continuous beepsremain,turn
the water and powersupplyoff
to the DishDrawe¢'.
6. WhencallingyourFisher_t
Paykel A uthorized ServiceCenter
advisethem of the fault code
that hasappeared on the
DishDrawer®.This information
will help theAuthorizedService
Centerrespondbetter to your
request.
3. We recommend you check
the chart belowand correctthe
fault wherepossible.
_._ ____ Floodswitch has Turnthe water and powersupplyto the DishDrawer®
beenactivated, off and callyourFisher _tPaykel A uthorized Service
H_VY _ O_M_L FAST _,C_ _ Center.
Motor problem. CallyourFisher_tPaykel A uthorized ServiceCenter.
HEAVY NOR_#AL bAST DELICATE Rh_dSE
Temperature sensor Ensure water comingin throughthe inlet hoseis not
,_xvY _4_ _AST" aEUCaT_ _,_SE failed, hotter than 149°EYoumay needto installa tempering
valve on yourwater supply.
F_ Faultytemperature CallyourFisher_tPaykel A uthorized ServiceCenter.
HEAVY _O_M_ _ ST o_uc_T_ _Ns_ sensoror element
Electronics CallyourFisher_tPaykel A uthorized ServiceCenter.
_: malfunction.
HE/AVY I_J'ORMAL _'_ST DEHCATE R_NSE
U_ FillFault • Turnthe DishDrawer_ water supplyon.
:_' • Ensure the sprayarm canrotate aboutthe center,and
HEAVY NORM/_L _:_ST DL°L_CAT_ R_NSE
if the DishDrawer_)is full of water, it will need to be
emptiedmanually.
If youhaveanyquestionsaboutoperatingthe product,pleasecontact
ourFisher_tPaykelCustomer CareCenter.