Maintenance - Craftsman BALL BEARING SERIES Operator's Manual

GRIPLATCH
TM
DRAWER FRONTS:
• To open, lift up on the drawer front while pulling towards you.
• To close, shut the drawer firmly until the latch engages.
• Pull back lightly to see if the drawer is completely closed.
MAINTENANCE
Drawer does not stay closed. The latch is bent. Lightly bend the latch until the
NOTE: The latch rubs against the drawer drawer will engage in the slide.
This latch is used for retaining sides. The latch should be slightly above
the drawer only, not for locking, the top of the drawer side.
Drawers Slides will not function properly. See drawer removal instructions.
See slide removal and installation
instructions.
LUBRICATION
Casters Use high quality grease Yearly
Slides Petroleum jelly or equivalent Twice a year or as needed
Lock G ra ph ite Yea rly
CLEANING
Drawer fronts and trim Mild detergent As needed
Outside of unit Auto wax As needed
Mild detergent As needed
Drawer liners Soap and water As needed