Advertisement
Quick Links
Operator's
Manual
I CRRFTgMRN°I
25cc/1.5 cu. in. 2-Cycle
GASOLINE
HEDGE TRIMMER
Model No.
358.796340
- 22" Blade
•
Safety
• Assembly
•
Operation
•
Maintenance
•
Parts List
•
Espar_ol,
p. 15
WARNING:
Read and follow all Safety
Rules and Operating
Instructions
before
first use of this product.
For answers
to your questions
about this product:
Call 7 am-7
pm, Mon-Sat;
10 am-7
pm, Sun
1-800-235-5878
(Hours listed are Central Time)
Sears, Roebuck
and Co., Hoffman
Estates,
IL 60179 U.S.A.
545140965
12/15/06
Advertisement
Related Manuals for Craftsman 358.796340
Summary of Contents for Craftsman 358.796340
- Page 1 Operator's Manual I CRRFTgMRN°I 25cc/1.5 cu. in. 2-Cycle GASOLINE HEDGE TRIMMER Model No. 358.796340 - 22" Blade • Safety • Assembly • Operation • Maintenance • Parts List • Espar_ol, p. 15 WARNING: Read and follow all Safety Rules and Operating Instructions before first use of this product.
- Page 2 Sears store, Sears Service Center, orother Craftsman outlet in the United States for f ree repair (or r eplacement ifrepair proves impossible).
- Page 3 WARNING: Blades can throw objects violently. • You can be blinded or injured. • Wear safety glasses. Safety Boots Glasses WARNING: Hazard zone for thrown objects • Blades can throw objects violently. • Others can be blinded or injured. • Keep people and animals 30 feet (10 m) away.
- Page 4 Users who operate power tools on a your Sears Service Center. continual and regular basis must moni- • Use only recommended Craftsman tor closely their physical condition and cutting blades and replacement the condition of this tool. parts; use of any other parts may...
- Page 5 30 days quality synthetic 2-cycle air-cooled or longer. Drain the gas tank, start the engine oil. We recommend Craftsman engine and let it run until the fuel lines brand synthetic oil. Mix gasoline and oil and carburetor are empty.
- Page 6 1. Move the ON/OFF switch to the ON OPERATING INSTRUCTIONS position. To maximize operating efficiency, 2. Engage the throttle lock as follows: not run the engine for longer than 30 seconds at a time at full throttle. • press the throttle lock-out; •...
- Page 7 choke l ever totheOFF C HOKE posi- 6. Allow the engine to run 10 seconds, tion. Allow the unit t orun for30more then move choke lever to the OFF seconds atthe OFF C HOKE position CHOKE position. before squeezing and releasing 7.
- Page 8 • After each use, clean the unit and la- As the unit is used, carbon deposits bels using a damp cloth with a mild build up on the muffler and spark ar- detergent. resting screen. For normal homeowner • Wipe off unit with a clean dry cloth. use, however, the muffler and spark ar- CLEAN AIR FILTER...
-
Page 9: Fuel System
Run engine cluding the blade. To oil the blade: at least 3 minutes after adding stabilizer. • Stop the engine and allow blade to Craftsman 40:1,2-cycle engine oil (air cooled) is already blended with fuel come to a complete stop. -
Page 10: Troubleshooting
ENGINE • Check entire unit for loose screws, • Remove spark plug and pour 1 tea- nuts, and bolts. Replace any dam- spoon of 40:1,2-cycle engine oil (air aged, broken, or worn parts. cooled) through the spark plug open- • At the beginning of the next season, ing. - Page 11 YOUR WARRANTY RIGHTS should be completed in a reasonable OBLIGATIONS: The U.S. Environmen- amount of time, not to exceed 30 days. tal Protection Agency/California Air Re- If you have any questions regarding sources Board and Sears, Roebuck your warranty rights and responsibili- and Co., U.S.A., are pleased to ex- ties, you should contact...
-
Page 12: Emission Control
WHERE TO GET WARRANTY SER- EMISSION CONTROL WARRANTY VICE: Warranty services or repairs PARTS LIST: Carburetor, Ignition Sys- shall be provided at all Sears Service tem: Spark Plug (covered up to mainte- Centers, Call 1-800-469-4663. MAIN- nance schedule), Ignition Module, Muf- TENANCE, REPLACEMENT AND RE-...