Advertisement
Available languages
Available languages
DRILL-DRIVER
973.114140
Chuck
3/8 in. Keyless
Motor
DC Motor 14.4 Volt
Switch
Variable Speed
No Load Speed
0-600 RPM
Clutch
24 Positions
Maximum Torque
CHARGING
ASSEMBLY
Rating
Charging Voltage
Charge Rate
BATTERY
PACK
100 lb.- in.
Item No. 9 11006
(1425005)
120 V, 60 Hz, AC only
14.4 Volt
3-6 Hours
Item No. 9 11007
(1322518)
KNOW
YOUR DRILL-DRIVER
See Figure 1,
Before attempting to use your drill-driver, familiarize
yourself with all operating features and safety
requirements,
KEYLESS
CHUCK
Your drill-driver has a keyless chuck that allows you to hand
tighten or release drill bit in the chuck jaws.
SWITCH
To turn your drill-driver ON, depress the switch trigger.
Release switch trigger to turn your drill-driver OFF.
SWITCH
LOCK
The switch trigger can be locked in the OFF position. This
feature helps reduce the possibility of accidental starting
when not in use.
VARIABLE
SPEED
This tool has a variable speed switch that delivers higher
speed with increased trigger pressure. Speed is controlled
by the amount of switch trigger depression.
FORWARD/REVERSE
SELECTOR
(DIRECTION
OF ROTATION SELECTOR)
Your drill-driver has a forward/reverse
selector located
above the switch trigger.
WRIST
STRAP
A wrist strap is provided to reduce the chances of dropping
your drill-driver. Place one hand through the wrist strap
when carrying tool.
BIT STORAGE
When not in use, bit(s) provided with your drill-driver can
be placed in the storage area located on the bottom of the
motor housing.
LEVEL
To keep drill bit level during drilling operations, a level is
located on the back of the motor housing.
_h
WARNING:
If any parts are missing, do not operate
your drill-driveruntilthe missing parts are replaced.
Failure to do so could result in possible serious
personal injury.
7
Advertisement
