Craftsman Side Cabinet with SS Protect-it Owner's Manual page 2

Step 4
Secure the upper rear top ofthe side cabinet to
the rollcabinet withthe bracket and two bolts.
REMOVING AND INSTALLING
DRAWERS:
* Empty the drawer.
* Fully extend the drawer.
* Lift the release lever on the right side, while
depressing the lever on the left side (this al-
lows the slides to ride over the stops). Pull the
&awer out to remove.
* To reinstall, push the drawer into the unit until
the &awer stops.
RELEASE LEVER
RELEASE LEVER
MAINTENANCE:
* Lubricate the slides (twice yearly).
* Lubricate the lock with graphite (yearly).
* Periodically the &awer fionts, drawer trim and
other surfaces should be cleaned with a mild
detergent and water.
* Auto wax will preserve the storage unit's luster
finish. Apply the wax as to a car. The wax will
also help protect the unit against scratches.
* Grease and oil can be removed with most stan-
dard cleaning fluids. For safety, use a nonflam-
mable cleaning fluid.
Note: This unit has the SS Protect-It'R coating. Do
not use stainless steel polish on this unit.
i