Multi Stage - Electrolux EW30DS65GB3 Use & Care Manual

34 Cooking odes
MULTi S TAGE
[] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] []
This feature enables you to perform sequential cooking at the touch of a button. Its purpose is to
program a queue of up to three cooking modes with individual cooking time and temperatures in
a sequence. This feature can be used with most cooking modes; Baking, Broiling, Convection
Baking, Convection Roasting, Convection Broiling, Keep Warm and Bread Proof. A Cook Time
can be programmed with your cooking mode and then queued. An auto-suggested set
temperature outputs in the display as a default value during the set temperature programming.
Any stage programmed with Broil or Convection Broil cannot last longer than 10 minutes. A proper
cook time and a set temperature are required for ever,/stage programming. At least two stages
must be programmed before a Multi=Stage cooking operation starts. During stage I cooking the
electronic control provides temperature visual output in the display. During stage 2 and 3, the
electronic control displays the set temperature only.
To set a Multi Stage sequence
(Timed Convection Bake, Timed Broil, Keep Warm):
t. Arrange interior oven racks and place food.
2. Select oven by pressing UPPER OVEN ""_"
OVEN"
3. Press MULTi STAGE _-.
Stage 1
4. Press CONVECTION BAKE [_M "350" will flash in the display prompting to enter a
temperature.
5. Enter a temperature using the numeric pads (_._'_ t o (i_.
6. Press START ¢. "00:00" will startflashing in the display prompting to enter a cook time.
7. Enter a cook time using the numeric pads CI_:I _to _:).
8. Press START ¢. The Multi-Stage indicator will now display the 2nd stage.
Stage 2
9. Press BROIL _. "550" will start flashing in the display prompting to enter a temperature,
10. Enter a temperature using the numeric pads C:_) to (:_.
11, Press START ¢. "00:00" will startflashing inthe display prompting to enter a cooktime.
12. Enter a cook time using the numeric pads _ii) to _@).
13. Press START€. The Multi-Stage indicatorwitl now display the 3rd stage. Ifa third stage
is not needed, press START _1"_a second time. This will start the cooking sequence.
Read next page for stage 3 and canceling details