Table of Contents
Advertisement
Surface Cooking
SURFACE COOKING UTENSILS
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
*GOOD
POOR
• Curved and warped pan bottoms.
Pans should have fiat bottoms.
Check for flatness by rotating a
ruler across the bottom. There
should be no gaps between the
pan and ruler.
* Specialty pans such as lobster
pots, griddles and pressure
cookers may be used but must
conform to the above recom-
mended cookware require-
ments.
o Flat bottom
and straight sides.
• Tight fitting lids.
• Weight of handle does not tilt pan.
Pan is well balanced.
• Pan sizes match the amount of
food to be prepared and the size of
burner.
• Made of material that conducts
heat well.
• Easy to clean.
• Pan overhangs unit by more than
2.5 cm (1").
• Heavy handle tilts pan.
Flame extends beyond unit.
v
Note: Always use a utensil for its intended purpose. Follow manufacturer's instruc-
tions. Some utensils were not made to be used in the oven or on the cooktop.
USINGTHE GRIDDLE
[] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] []
Figure 2
Figure 3
Side with g
Flat Side
The griddle is intended for direct food cooking and can be used on both
sides (Figures 2 and 3). Do not use pans or other cookware on the griddle.
Doing so could damage the finish. With the grate in position over the
burner, set the griddle on top of the grate positioning the notches in the
griddle over the grate fingers (Figures 1 and 2).
Advertisement
Table of Contents
