Download Print this page

Craftsman 358.792410 Operator's Manual page 8

Cultivator attachment
Hide thumbs Also See for 358.792410:

Advertisement

Available languages

Available languages

5.Once t he ground has been b roken,
continue atamoderate
pace until
you are familiar with the controls
and thehandling ofthecultivator.
6.Pull the cultivator backwards
toim-
prove t he depth o fcultivation
and
reduce your e ffort.
7.Tocultivate inconfined areas o r
narrow r ows, remove the left a nd
right outer tines ( see TINE R E-
PLACEMENT).
MAINTENANCE
SCHEDULE
,_
WARNING:
Always stop unit and disconnect
spark plug wire (or discon-
nect powerhead
from power source) before performing
maintenance.
CARE AND MAINTENANCE
TASK
Check for loose fasteners and parts
Check for damaged or worn parts
Inspect and clean unit and decals
Check or replace tines
GENERAL
RECOMMEN
DATIONS
The warranty on this attachment
does
not cover items that have been sub-
jected to operator abuse or negli-
gence. To receive full value from the
warranty, the operator must maintain
the cultivator
attachment
as instructed
in this manual.
CHECK FOR DAMAGED
OR
WORN PARTS
Contact Sears Service
Center for re-
placement
of damaged
or worn parts.
• Tine Cover - Discontinue
use of cul-
tivator if tine cover is damaged.
CHECK FOR LOOSE
FASTENERS
AND PARTS
• Clevis pins
• Hitch pin clips
INSPECT
AND CLEAN UNIT AND
DECALS
• After each use, inspect complete
unit for loose or damaged
parts.
Clean the unit and decals using a
damp cloth with a mild detergent.
• Wipe off unit with a clean dry cloth.
WHEN TO PERFORM
Before each use
Before each use
After each use
Every 5 hours of operation
TINE MAINTENANCE
,40kWARNING:
The tines will contin-
ue to spin after the engine stops or af-
ter the throttle trigger has been re-
leased.
To avoid serious injury, make
sure the tines have stopped coasting
and disconnect
the spark plug (or dis-
connect
powerhead
from power
source)
before performing
work on the
tines.
,_WARNING:
Always replace
tines that are bent, warped, cracked,
broken, or damaged
in any other way.
Never attempt to straighten
and reuse
a damaged
tine.
Use only specified
replacement
tines. Wear protective
gloves when handling
or performing
maintenance
on the tines to help
avoid injury.

Advertisement

loading