Electrical Safety - Craftsman 172.34120 Operator's Manual

z_ WARNING : if correctly used, this electric Chain Saw is an efficient tool to use;
if used improperly or without the due precautions it could become a dangerous tool.
For pleasant and safe work, ALWAYS strictly comply with the safety rules that are
contained in this manual
Z_ WARNING:
BE SURE to read and understand all instructions in this manual
before using this electric Chain Saw. Failure to follow aU instructions listed below
may result in electric shock, fire and!or serious personal injury.
A WARNING:
To avoid mistakes that could cause serious injury, DO NOT
connect the Chain Saw to the power source until the following instructions have been
read and understood.
WORK AREA SAFETY
WARNING:
Consider the work area environment. Use extreme caution
when cutting small size brush and saplings because the slender material may catch
the saw chain and be whipped toward you or pull you off balance. DO NOT operate
a chain saw in a tree unless specifically trained to do so. When cutting a limb that is
under tension be alert for spring back so that you wilt not be struck when the tension
in the wood fibers is released.
1. ALWAYS avoid dangerous conditions. DO NOT use in wet, damp areas or expose to rain.
2. DO NOT operate in the presence of flammable liquids, gases, or dust. Electric
tools create sparks which may ignite dust or fumes.
3. ALWAYS keep bystanders and visitors at a safe distance while operating
this Chain Saw. NEVER allow children or pets near the tool. Flying objects can
injure anyone in the area.
4. CHILDPROOF your tools with padlocks and master switches. Lock tools away when
not in use. This Chain Saw is not a toy.
5. DO NOT use the Chain Saw without adequate lighting. ALWAYS make sure that you
can see what you are cutting.
6. BEFORE using the Chain Saw, remove any debris or objects that could be entangled
in or thrown by the Chain Saw.
PERSONAL SAFETY
OBJECTS BEING THROWN, which can result in personal injury or property
damage. ALWAYS use proper safety equipment.
1. KNOW your toot. Read the operator's manual carefully. Learn the electric Chain Saw's
applications and limitations, as well as the specific potential hazards related to this tool.
2. STAY ALERT, watch what you are doing and use common sense when operating this tool.
3. DO NOT use tool while tired or under the influence of drugs, alcohol or medication.
A moment of inattention while operating this tool may result in serious personal injury.
4. DRESS PROPERLY, USE SAFETY EQUIPMENT. Always wear safety goggles with side
shields (non-fogging and vented) or full face shield, proper work shoes, steel-toe with
rubber non-slip soles, heavy-duty non-slip rubber gloves, dust mask or respirator and
hearing protection. Regular users should have hearing checked regularly, as chain saw
noise can damage hearing. Wear tong protective pants and tong sleeves to protect arms
and legs. 4
PERSONAL SAFETY cont.
4. (cont.) DO NOT wear loose clothing or jewelry.
Keep your hair, clothing, and gloves away from
moving parts. Loose clothing or long hair can be
caught in moving parts.
5. DO NOT overreach. Keep proper footing and
balance at all times. Proper footing and balance
enables better control of the tool in unexpected
situations.
6. Keep all parts of the body away from the saw
chain when the motor is operating.
• /----- Safety Helmet
Heartng Protection
Protection
Eye
Snug Fitting f,,_,_[r- "_ Protection
Clothing _ _---/t % }
/11 I: _
Heavy Duty
yes
Safety Shoes _ _ fety Chaps
TOOL USE AND CARE SAFETY
i _ WARNING: BE SURE to read and understand all instructions before
operating this tool. Failure to follow all instructions listed below may result in
electric shock, fire and/or serious personal injury.
1. DO NOT use the tool if switch does not turn it "On" or "Off". Any tool that cannot be
controlled with the switch is dangerous and must be repaired.
2. DISCONNECT the plug from the power source before making any adjustments or storing
the tool. Such preventive safety measures reduce the risk of starting the toot accidentally.
3. STORE idle tools out of the reach of children and other untrained persons. Children
MUST NOT operate the tool. Tools are dangerous in the hands of untrained users.
4. MAINTAIN tools with care. ALWAYS keep cutting tools clean and in good working order.
5. CHECK for misalignment or binding of moving parts, breakage of parts, and any other
condition that may affect the tool's operation. If damaged, have the toot serviced
before using. Many accidents are caused by poorly maintained tools.
6. USE ONLY chains that are recommended for this Chain Saw. Chains that may be
suitable for one Chain Saw may become hazardous when used on another Chain Saw.
ELECTRiCAL SAFETY
Z_ WARNING: Do not permit fingers to touch the terminals of plug when i
installing or removing the extension cord from the plug.
J
• Double insulated tools are equipped with a polarized plug
(one blade is wider than the other and will require the use
of a polarized extension cord, The Chain Saw's plug will fit
into a polarized extension cord only one way. If the plug does
not fit fully into the extension cord, reverse the plug. If the plug
still does not fit, obtain a correct polarized extension cord.
A polarized extension cord will require the use of a polarized
walt outlet• This plug wilt fit into the polarized wall outlet only
one way. If the plug does not fit fully intothe wall outlet,
reverse the plug. If the plug still does not fit, contact a qualified
electrician to install the proper outlet• Do not change or alter
the equipment plug, extension cord receptacle, or extension cord plug in any way.
2. Double insulation [] eliminates the need for the three-wire grounded power cord and
grounded power supply system. Applicable only to Class Jl (double-insulated) tools.
This Chain Saw is a double insulated toot.
5
3/I 4/I 2
Final ART