Switch Off - Nokia BH-806 Manual

Hide thumbs Also See for BH-806:
Table of Contents

Advertisement

When you unplug a charger, hold and pull the plug, not the cord.
The fully charged battery has power for up to 5 hours of talk time and up to 100
hours of standby time. If you keep the headset in the carrying clip, the standby time is
up to 3 months.
When the battery charge is low, the red indicator light flashes, and you hear a voice
prompt every 5 minutes. If you have deactivated voice prompts, the headset beeps every
5 minutes.
Check the battery charge
Make sure the headset is switched on, and touch and hold
prompt tells you the battery charge level.
Switch the headset on or off
Switch on
Remove the headset from the carrying clip. The headset beeps, and a green indicator
light flashes once.
The headset connects to the last connected device. If you have never paired the headset
with a device, or you have cleared the device pairings, pairing mode is activated.

Switch off

Place the headset in the carrying clip. The headset beeps, and a red indicator light flashes
once. All active calls are ended.
If not connected to a device within 30 minutes, the headset switches off.
Tip: Don't have the carrying clip with you? To switch the headset off, press and hold
for 4 seconds. To switch the headset on, press
Pair and connect the headset to your mobile device
Before using the headset, you must pair and connect it to a compatible device.
1
To switch the headset off, press and hold
2
Switch on the device to pair with.
3
If you have never paired the headset with a device, or you have cleared the device
pairings, switch the headset on.
If you have previously paired your headset with another device, press and hold
for 5 seconds.
for 2 seconds. A voice
.
for 4 seconds.
5

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

J

Table of Contents