C.
Rear Lift Link(S)
D,
Right Side Rear Mower Bracket
U. Hole
8
Attach front link (E)
Turn steering wheel to position wheels
straight forward.
•
From front of tractor, insert rod end of
front link (E) through front hole intractor
front suspension bracket (F),
•
Move to left side of mower and and insert
large retainer spring (G) through hole in
front link (E) behind front suspension
bracket (F).
°
Insert other end of link (E) into hole in
front mower bracket (H) and secure with
washer and small retainer spring (J).
NOTE: Requires deck lifting.
9
Install Belt On Engine Clutch Pulley (M)
•
Disengage belt tension rod (K) from
locking bracket (L).
,
Install belt onto engine clutch pulley (M).
IMPORTANT: Check belt for proper rout-
ing in all mower pulley grooves and under
mandrel covers.
M.Engine
Clutch Pulley
Engage belt tension rod (K) on locking
bracket (L).
_CAUTION:
Belt tension rod is spring
loaded, Have a tight grip on rod and
engage slowly.
•
Raise attachment lift lever to highest
position.
•
Ifnecessary, adjust gauge wheels before
operating moweras shown inthe owner's/
operator's manual. Checkgaugewheels,
deck level and rake settings.
E. Front Lift Link Assembly
E
Front Suspension 8racket
G. Large Retainer Spring
H. Front Mower Bracket
J.
Small Retainer Spring
M. Engine Clutch Pulley
11