Connection To A Tv (For Video) - Denon DVM-1815 Operating Instructions Manual

Dvd video auto changer
Hide thumbs Also See for DVM-1815:
Table of Contents

Advertisement

Connection to a TV (for video)
_>_
Basic Audio
[ Method 1 I
Good
picture
I Method 2 1
Better picture
I Method 3 ]
Best picture
VIDEO
IN
COMPONENT
VIDEO
IN
AV Cable
I
AUDIO OUT
D
I
Analog
Audio
out
Video
out
D
S-Video
out
COMPONENT
__VIDE0 OUT
Component Video out
• Method 1 DVD Player + TV with Video Input Jack
• Method 2 DVD Player + TV with S-Video Input Jack
• Method 3 DVD Player + TV with Component Video Jacks
NOTES
• If your TV is compatible with progressive scanning (480p), connect the TV to the Component Video Output jacks of the DVD
player. Refer to page 12.
• Connect the DVD player directly to a TV. If the AN cables are connected to a VCR, pictures may be distorted due to the
copy protection system.
• S-Video output connector
The video signals are divided into color (C) and brightness
(Y) signals, achieving a clearer picture.
If the TV is equipped with a S-Video input connector, we recommend
connecting it to the this product's S-Video output con-
nector using a commercially
available S-Video connection cord.
HOW TO CONNECT
TO A TV WITHOUT
AUDIO/VIDEO
INPUT
JACKS
If your TV does not have RCA type audio and video input jacks it is still possible to connect this DVD
player to your TV's 75-ohm coaxial antenna terminal using an optional Stereo AudioNideo
RF Modulator, not includ-
ed. Connect the audio and video outputs of the DVD player to the audio and video inputs on the RF Modulator, and
then connect the coaxial output of the RF Modulator (usually marked "TO TV") to the 75 ohm coaxial antenna termi-
nal on your TV. Follow the instruction supplied with the RF Modulator for more details.
If your TV's 75 ohm coaxial antenna terminal is already occupied by an antenna or cable box connection, remove that
cable from your TV's antenna terminal and reconnect it to the coaxial antenna input terminal of the RF Modulator
(usually marked "ANT IN"), then connect the RF modulator to your TV's antenna
terminal as described above.
NOTE
• The picture quality from DVD discs will not be as good if the DVD player is connected to the TV's antenna terminal
through an RF Modulator.
- 14-
EN

Advertisement

Table of Contents
loading

Table of Contents